[PATCH 1/2] lib: use glib for sha1 digests instead of embedding libsha1
Jani Nikula
jani at nikula.org
Fri Jan 6 13:29:27 PST 2017
We already depend on glib both directly and indirectly (via gmime). We
might as well make use of its facilities. Drop the embedded libsha1
and use glib for sha1 digests.
---
lib/Makefile.local | 1 -
lib/libsha1.c | 244 -----------------------------------------------------
lib/libsha1.h | 71 ----------------
lib/sha1.c | 69 ++++++---------
4 files changed, 24 insertions(+), 361 deletions(-)
delete mode 100644 lib/libsha1.c
delete mode 100644 lib/libsha1.h
diff --git a/lib/Makefile.local b/lib/Makefile.local
index 3d1030a56740..b77e57803288 100644
--- a/lib/Makefile.local
+++ b/lib/Makefile.local
@@ -35,7 +35,6 @@ libnotmuch_c_srcs = \
$(notmuch_compat_srcs) \
$(dir)/filenames.c \
$(dir)/string-list.c \
- $(dir)/libsha1.c \
$(dir)/message-file.c \
$(dir)/messages.c \
$(dir)/sha1.c \
diff --git a/lib/libsha1.c b/lib/libsha1.c
deleted file mode 100644
index aaaa4eb2fc14..000000000000
--- a/lib/libsha1.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- ---------------------------------------------------------------------------
- Copyright (c) 2002, Dr Brian Gladman, Worcester, UK. All rights reserved.
-
- LICENSE TERMS
-
- The free distribution and use of this software in both source and binary
- form is allowed (with or without changes) provided that:
-
- 1. distributions of this source code include the above copyright
- notice, this list of conditions and the following disclaimer;
-
- 2. distributions in binary form include the above copyright
- notice, this list of conditions and the following disclaimer
- in the documentation and/or other associated materials;
-
- 3. the copyright holder's name is not used to endorse products
- built using this software without specific written permission.
-
- ALTERNATIVELY, provided that this notice is retained in full, this product
- may be distributed under the terms of the GNU General Public License (GPL),
- in which case the provisions of the GPL apply INSTEAD OF those given above.
-
- DISCLAIMER
-
- This software is provided 'as is' with no explicit or implied warranties
- in respect of its properties, including, but not limited to, correctness
- and/or fitness for purpose.
- ---------------------------------------------------------------------------
- Issue Date: 01/08/2005
-
- This is a byte oriented version of SHA1 that operates on arrays of bytes
- stored in memory.
-*/
-
-#include <string.h> /* for memcpy() etc. */
-#include "endian-util.h"
-#include "libsha1.h"
-
-#if defined(__cplusplus)
-extern "C"
-{
-#endif
-
-#define SHA1_BLOCK_SIZE 64
-
-#define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))
-#define rotr32(x,n) (((x) >> n) | ((x) << (32 - n)))
-
-#define bswap_32(x) ((rotr32((x), 24) & 0x00ff00ff) | (rotr32((x), 8) & 0xff00ff00))
-
-#if (UTIL_BYTE_ORDER == UTIL_ORDER_LITTLE_ENDIAN)
-# define bsw_32(p,n) \
- { int _i = (n); while(_i--) ((uint32_t*)p)[_i] = bswap_32(((uint32_t*)p)[_i]); }
-#elif (UTIL_BYTE_ORDER == UTIL_ORDER_BIG_ENDIAN)
-# define bsw_32(p,n)
-#else
-# error "Unsupported byte order"
-#endif
-
-#define SHA1_MASK (SHA1_BLOCK_SIZE - 1)
-
-#if 0
-
-#define ch(x,y,z) (((x) & (y)) ^ (~(x) & (z)))
-#define parity(x,y,z) ((x) ^ (y) ^ (z))
-#define maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
-
-#else /* Discovered by Rich Schroeppel and Colin Plumb */
-
-#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z))))
-#define parity(x,y,z) ((x) ^ (y) ^ (z))
-#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) ^ (y))))
-
-#endif
-
-/* Compile 64 bytes of hash data into SHA1 context. Note */
-/* that this routine assumes that the byte order in the */
-/* ctx->wbuf[] at this point is in such an order that low */
-/* address bytes in the ORIGINAL byte stream will go in */
-/* this buffer to the high end of 32-bit words on BOTH big */
-/* and little endian systems */
-
-#ifdef ARRAY
-#define q(v,n) v[n]
-#else
-#define q(v,n) v##n
-#endif
-
-#define one_cycle(v,a,b,c,d,e,f,k,h) \
- q(v,e) += rotr32(q(v,a),27) + \
- f(q(v,b),q(v,c),q(v,d)) + k + h; \
- q(v,b) = rotr32(q(v,b), 2)
-
-#define five_cycle(v,f,k,i) \
- one_cycle(v, 0,1,2,3,4, f,k,hf(i )); \
- one_cycle(v, 4,0,1,2,3, f,k,hf(i+1)); \
- one_cycle(v, 3,4,0,1,2, f,k,hf(i+2)); \
- one_cycle(v, 2,3,4,0,1, f,k,hf(i+3)); \
- one_cycle(v, 1,2,3,4,0, f,k,hf(i+4))
-
-static void sha1_compile(sha1_ctx ctx[1])
-{ uint32_t *w = ctx->wbuf;
-
-#ifdef ARRAY
- uint32_t v[5];
- memcpy(v, ctx->hash, 5 * sizeof(uint32_t));
-#else
- uint32_t v0, v1, v2, v3, v4;
- v0 = ctx->hash[0]; v1 = ctx->hash[1];
- v2 = ctx->hash[2]; v3 = ctx->hash[3];
- v4 = ctx->hash[4];
-#endif
-
-#define hf(i) w[i]
-
- five_cycle(v, ch, 0x5a827999, 0);
- five_cycle(v, ch, 0x5a827999, 5);
- five_cycle(v, ch, 0x5a827999, 10);
- one_cycle(v,0,1,2,3,4, ch, 0x5a827999, hf(15)); \
-
-#undef hf
-#define hf(i) (w[(i) & 15] = rotl32( \
- w[((i) + 13) & 15] ^ w[((i) + 8) & 15] \
- ^ w[((i) + 2) & 15] ^ w[(i) & 15], 1))
-
- one_cycle(v,4,0,1,2,3, ch, 0x5a827999, hf(16));
- one_cycle(v,3,4,0,1,2, ch, 0x5a827999, hf(17));
- one_cycle(v,2,3,4,0,1, ch, 0x5a827999, hf(18));
- one_cycle(v,1,2,3,4,0, ch, 0x5a827999, hf(19));
-
- five_cycle(v, parity, 0x6ed9eba1, 20);
- five_cycle(v, parity, 0x6ed9eba1, 25);
- five_cycle(v, parity, 0x6ed9eba1, 30);
- five_cycle(v, parity, 0x6ed9eba1, 35);
-
- five_cycle(v, maj, 0x8f1bbcdc, 40);
- five_cycle(v, maj, 0x8f1bbcdc, 45);
- five_cycle(v, maj, 0x8f1bbcdc, 50);
- five_cycle(v, maj, 0x8f1bbcdc, 55);
-
- five_cycle(v, parity, 0xca62c1d6, 60);
- five_cycle(v, parity, 0xca62c1d6, 65);
- five_cycle(v, parity, 0xca62c1d6, 70);
- five_cycle(v, parity, 0xca62c1d6, 75);
-
-#ifdef ARRAY
- ctx->hash[0] += v[0]; ctx->hash[1] += v[1];
- ctx->hash[2] += v[2]; ctx->hash[3] += v[3];
- ctx->hash[4] += v[4];
-#else
- ctx->hash[0] += v0; ctx->hash[1] += v1;
- ctx->hash[2] += v2; ctx->hash[3] += v3;
- ctx->hash[4] += v4;
-#endif
-}
-
-void sha1_begin(sha1_ctx ctx[1])
-{
- ctx->count[0] = ctx->count[1] = 0;
- ctx->hash[0] = 0x67452301;
- ctx->hash[1] = 0xefcdab89;
- ctx->hash[2] = 0x98badcfe;
- ctx->hash[3] = 0x10325476;
- ctx->hash[4] = 0xc3d2e1f0;
-}
-
-/* SHA1 hash data in an array of bytes into hash buffer and */
-/* call the hash_compile function as required. */
-
-void sha1_hash(const unsigned char data[], unsigned long len, sha1_ctx ctx[1])
-{ uint32_t pos = (uint32_t)(ctx->count[0] & SHA1_MASK),
- space = SHA1_BLOCK_SIZE - pos;
- const unsigned char *sp = data;
-
- if((ctx->count[0] += len) < len)
- ++(ctx->count[1]);
-
- while(len >= space) /* transfer whole blocks if possible */
- {
- memcpy(((unsigned char*)ctx->wbuf) + pos, sp, space);
- sp += space; len -= space; space = SHA1_BLOCK_SIZE; pos = 0;
- bsw_32(ctx->wbuf, SHA1_BLOCK_SIZE >> 2);
- sha1_compile(ctx);
- }
-
- memcpy(((unsigned char*)ctx->wbuf) + pos, sp, len);
-}
-
-/* SHA1 final padding and digest calculation */
-
-void sha1_end(unsigned char hval[], sha1_ctx ctx[1])
-{ uint32_t i = (uint32_t)(ctx->count[0] & SHA1_MASK);
-
- /* put bytes in the buffer in an order in which references to */
- /* 32-bit words will put bytes with lower addresses into the */
- /* top of 32 bit words on BOTH big and little endian machines */
- bsw_32(ctx->wbuf, (i + 3) >> 2);
-
- /* we now need to mask valid bytes and add the padding which is */
- /* a single 1 bit and as many zero bits as necessary. Note that */
- /* we can always add the first padding byte here because the */
- /* buffer always has at least one empty slot */
- ctx->wbuf[i >> 2] &= 0xffffff80 << 8 * (~i & 3);
- ctx->wbuf[i >> 2] |= 0x00000080 << 8 * (~i & 3);
-
- /* we need 9 or more empty positions, one for the padding byte */
- /* (above) and eight for the length count. If there is not */
- /* enough space, pad and empty the buffer */
- if(i > SHA1_BLOCK_SIZE - 9)
- {
- if(i < 60) ctx->wbuf[15] = 0;
- sha1_compile(ctx);
- i = 0;
- }
- else /* compute a word index for the empty buffer positions */
- i = (i >> 2) + 1;
-
- while(i < 14) /* and zero pad all but last two positions */
- ctx->wbuf[i++] = 0;
-
- /* the following 32-bit length fields are assembled in the */
- /* wrong byte order on little endian machines but this is */
- /* corrected later since they are only ever used as 32-bit */
- /* word values. */
- ctx->wbuf[14] = (ctx->count[1] << 3) | (ctx->count[0] >> 29);
- ctx->wbuf[15] = ctx->count[0] << 3;
- sha1_compile(ctx);
-
- /* extract the hash value as bytes in case the hash buffer is */
- /* misaligned for 32-bit words */
- for(i = 0; i < SHA1_DIGEST_SIZE; ++i)
- hval[i] = (unsigned char)(ctx->hash[i >> 2] >> (8 * (~i & 3)));
-}
-
-void sha1(unsigned char hval[], const unsigned char data[], unsigned long len)
-{ sha1_ctx cx[1];
-
- sha1_begin(cx); sha1_hash(data, len, cx); sha1_end(hval, cx);
-}
-
-#if defined(__cplusplus)
-}
-#endif
diff --git a/lib/libsha1.h b/lib/libsha1.h
deleted file mode 100644
index 56f445a9ac42..000000000000
--- a/lib/libsha1.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- ---------------------------------------------------------------------------
- Copyright (c) 2002, Dr Brian Gladman, Worcester, UK. All rights reserved.
-
- LICENSE TERMS
-
- The free distribution and use of this software in both source and binary
- form is allowed (with or without changes) provided that:
-
- 1. distributions of this source code include the above copyright
- notice, this list of conditions and the following disclaimer;
-
- 2. distributions in binary form include the above copyright
- notice, this list of conditions and the following disclaimer
- in the documentation and/or other associated materials;
-
- 3. the copyright holder's name is not used to endorse products
- built using this software without specific written permission.
-
- ALTERNATIVELY, provided that this notice is retained in full, this product
- may be distributed under the terms of the GNU General Public License (GPL),
- in which case the provisions of the GPL apply INSTEAD OF those given above.
-
- DISCLAIMER
-
- This software is provided 'as is' with no explicit or implied warranties
- in respect of its properties, including, but not limited to, correctness
- and/or fitness for purpose.
- ---------------------------------------------------------------------------
- Issue Date: 01/08/2005
-*/
-
-#ifndef _SHA1_H
-#define _SHA1_H
-
-#if defined(__cplusplus)
-extern "C"
-{
-#endif
-#if 0
-} /* Appeasing Emacs */
-#endif
-
-#include <stdint.h>
-
-#pragma GCC visibility push(hidden)
-
-/* Size of SHA1 digest */
-
-#define SHA1_DIGEST_SIZE 20
-
-/* type to hold the SHA1 context */
-
-typedef struct
-{ uint32_t count[2];
- uint32_t hash[5];
- uint32_t wbuf[16];
-} sha1_ctx;
-
-void sha1_begin(sha1_ctx ctx[1]);
-void sha1_hash(const unsigned char data[], unsigned long len, sha1_ctx ctx[1]);
-void sha1_end(unsigned char hval[], sha1_ctx ctx[1]);
-void sha1(unsigned char hval[], const unsigned char data[], unsigned long len);
-
-#pragma GCC visibility pop
-
-#if defined(__cplusplus)
-}
-#endif
-
-#endif
diff --git a/lib/sha1.c b/lib/sha1.c
index b7dea1c2a577..cb55b49a4f11 100644
--- a/lib/sha1.c
+++ b/lib/sha1.c
@@ -20,28 +20,7 @@
#include "notmuch-private.h"
-#include "libsha1.h"
-
-/* Just some simple interfaces on top of libsha1 so that we can leave
- * libsha1 as untouched as possible. */
-
-static char *
-_hex_of_sha1_digest (const unsigned char digest[SHA1_DIGEST_SIZE])
-{
- char *result, *r;
- int i;
-
- result = xcalloc (SHA1_DIGEST_SIZE * 2 + 1, 1);
-
- for (r = result, i = 0;
- i < SHA1_DIGEST_SIZE;
- r += 2, i++)
- {
- sprintf (r, "%02x", digest[i]);
- }
-
- return result;
-}
+#include <glib.h>
/* Create a hexadecimal string version of the SHA-1 digest of 'str'
* (including its null terminating character).
@@ -52,16 +31,15 @@ _hex_of_sha1_digest (const unsigned char digest[SHA1_DIGEST_SIZE])
char *
_notmuch_sha1_of_string (const char *str)
{
- sha1_ctx sha1;
- unsigned char digest[SHA1_DIGEST_SIZE];
-
- sha1_begin (&sha1);
+ GChecksum *sha1;
+ char *digest;
- sha1_hash ((unsigned char *) str, strlen (str) + 1, &sha1);
+ sha1 = g_checksum_new (G_CHECKSUM_SHA1);
+ g_checksum_update (sha1, (const guchar *) str, strlen (str) + 1);
+ digest = xstrdup (g_checksum_get_string (sha1));
+ g_checksum_free (sha1);
- sha1_end (digest, &sha1);
-
- return _hex_of_sha1_digest (digest);
+ return digest;
}
/* Create a hexadecimal string version of the SHA-1 digest of the
@@ -80,35 +58,36 @@ _notmuch_sha1_of_file (const char *filename)
#define BLOCK_SIZE 4096
unsigned char block[BLOCK_SIZE];
size_t bytes_read;
- sha1_ctx sha1;
- unsigned char digest[SHA1_DIGEST_SIZE];
- char *result;
+ GChecksum *sha1;
+ char *digest = NULL;
file = fopen (filename, "r");
if (file == NULL)
return NULL;
- sha1_begin (&sha1);
+ sha1 = g_checksum_new (G_CHECKSUM_SHA1);
+ if (sha1 == NULL)
+ goto DONE;
while (1) {
bytes_read = fread (block, 1, 4096, file);
if (bytes_read == 0) {
- if (feof (file)) {
+ if (feof (file))
break;
- } else if (ferror (file)) {
- fclose (file);
- return NULL;
- }
+ else if (ferror (file))
+ goto DONE;
} else {
- sha1_hash (block, bytes_read, &sha1);
+ g_checksum_update (sha1, block, bytes_read);
}
}
- sha1_end (digest, &sha1);
-
- result = _hex_of_sha1_digest (digest);
+ digest = xstrdup (g_checksum_get_string (sha1));
- fclose (file);
+ DONE:
+ if (sha1)
+ g_checksum_free (sha1);
+ if (file)
+ fclose (file);
- return result;
+ return digest;
}
--
2.11.0
More information about the notmuch
mailing list