[PATCH] nmbug: Add 'clone' and replace FETCH_HEAD with @{upstream}
W. Trevor King
wking at tremily.us
Sat Feb 8 14:21:56 PST 2014
From: "W. Trevor King" <wking at tremily.us>
With two branches getting fetched (master and config), the branch
referenced by FETCH_HEAD is ambiguous. For example, I have:
$ cat FETCH_HEAD
41d7bfa7184cc93c9dac139d1674e9530799e3b0 \
not-for-merge branch 'config' of http://nmbug.tethera.net/git/nmbug-tags
acd379ccb973c45713eee9db177efc530f921954 \
not-for-merge branch 'master' of http://nmbug.tethera.net/git/nmbug-tags
(where I wrapped the line by hand). This means that FETCH_HEAD
references the config branch:
$ git rev-parse FETCH_HEAD
41d7bfa7184cc93c9dac139d1674e9530799e3b0
which breaks all of the FETCH_HEAD logic in nmbug (where FETCH_HEAD is
assumed to point to the master branch).
Instead of relying on FETCH_HEAD, use @{upstream} as the
remote-tracking branch that should be merged/diffed/integrated into
HEAD. @{upstream} was added in Git v1.7.0 (2010-02-12) [1], so
relying on it should be fairly safe. One tricky bit is that bare
repositories don't set upstream tracking branches by default:
$ git clone --bare http://nmbug.tethera.net/git/nmbug-tags.git nmbug-bare
$ cd nmbug-bare
$ git remote show origin
* remote origin
Fetch URL: http://nmbug.tethera.net/git/nmbug-tags.git
Push URL: http://nmbug.tethera.net/git/nmbug-tags.git
HEAD branch: master
Local refs configured for 'git push':
config pushes to config (up to date)
master pushes to master (up to date)
While in a non-bare clone:
$ git clone http://nmbug.tethera.net/git/nmbug-tags.git
$ cd nmbug-tags
$ git remote show origin
* remote origin
Fetch URL: http://nmbug.tethera.net/git/nmbug-tags.git
Push URL: http://nmbug.tethera.net/git/nmbug-tags.git
HEAD branch: master
Remote branches:
config tracked
master tracked
Local branch configured for 'git pull':
master merges with remote master
Local ref configured for 'git push':
master pushes to master (up to date)
>From the clone docs [2]:
--bare::
Make a 'bare' Git repository…
Also the branch heads at the remote are copied directly
to corresponding local branch heads, without mapping
them to `refs/remotes/origin/`. When this option is
used, neither remote-tracking branches nor the related
configuration variables are created.
To use @{upstream}, we need to restore the local vs. remote-tracking
distinction, so this commit adds 'nmbug clone', which adds the
following configuration adjustments:
$ git config remote.origin.fetch '+refs/heads/*:refs/remotes/origin/*'
$ git config branch.$branch.remote origin
$ git config branch.$branch.merge refs/heads/$branch
where $branch is the branch referenced by the remote's HEAD, which
'git clone' uses to setup the local branch. After tweaking the
config, we populate the new remote-tracking branches with:
$ git fetch origin
After which:
$ git rev-parse @{upstream}
acd379ccb973c45713eee9db177efc530f921954
gives us the master-branch commit. Existing nmbug users will have to
run the configuration tweaks and re-fetch by hand. If you don't have
any local commits, you could also blow away your NMBGIT repository and
re-clone from scratch:
$ nmbug clone http://nmbug.tethera.net/git/nmbug-tags.git
Besides removing the ambiguity of FETCH_HEAD, this commit allows users
to configure which upstream branch they want nmbug to track via 'git
config', in case they want to change their upstream repository.
[1]: http://git.kernel.org/cgit/git/git.git/tree/Documentation/RelNotes/1.7.0.txt
[2]: http://git.kernel.org/cgit/git/git.git/tree/Documentation/git-clone.txt
---
devel/nmbug/nmbug | 49 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 35 insertions(+), 14 deletions(-)
diff --git a/devel/nmbug/nmbug b/devel/nmbug/nmbug
index 90d98b6..3c1d597 100755
--- a/devel/nmbug/nmbug
+++ b/devel/nmbug/nmbug
@@ -26,6 +26,7 @@ my $ESCAPED_RX = qr{$ESCAPE_CHAR([A-Fa-f0-9]{2})};
my %command = (
archive => \&do_archive,
checkout => \&do_checkout,
+ clone => \&do_clone,
commit => \&do_commit,
fetch => \&do_fetch,
help => \&do_help,
@@ -125,6 +126,17 @@ sub do_archive {
system ('git', "--git-dir=$NMBGIT", 'archive', 'HEAD');
}
+sub do_clone {
+ my $repository = shift;
+ system ('git', 'clone', '--bare', $repository, $NMBGIT) == 0
+ or die "'git clone' exited with nonzero value\n";
+ my $branch = git ('symbolic-ref', 'HEAD');
+ $branch =~ s|^refs/heads/||;
+ git ('config', 'remote.origin.fetch', '+refs/heads/*:refs/remotes/origin/*');
+ git ('config', "branch.$branch.remote", 'origin');
+ git ('config', "branch.$branch.merge", 'refs/heads/$branch');
+ do_fetch();
+}
sub is_committed {
my $status = shift;
@@ -332,21 +344,24 @@ To discard your changes, run 'nmbug checkout'
sub do_pull {
my $remote = shift || 'origin';
+ my $branch = shift || 'master';
git ( 'fetch', $remote);
- do_merge ();
+ do_merge ("$remote/$branch");
}
sub do_merge {
+ my $commit = shift || '@{upstream}';
+
insist_committed ();
my $tempwork = tempdir ('/tmp/nmbug-merge.XXXXXX', CLEANUP => 1);
git ( { GIT_WORK_TREE => $tempwork }, 'checkout', '-f', 'HEAD');
- git ( { GIT_WORK_TREE => $tempwork }, 'merge', 'FETCH_HEAD');
+ git ( { GIT_WORK_TREE => $tempwork }, 'merge', $commit);
do_checkout ();
}
@@ -407,13 +422,12 @@ sub do_status {
sub is_unmerged {
+ my $commit = shift || '@{upstream}';
- return 0 if (! -f $NMBGIT.'/FETCH_HEAD');
-
- my $fetch_head = git ('rev-parse', 'FETCH_HEAD');
- my $base = git ( 'merge-base', 'HEAD', 'FETCH_HEAD');
+ my $upstream = git ('rev-parse', $commit);
+ my $base = git ( 'merge-base', 'HEAD', $commit);
- return ($base ne $fetch_head);
+ return ($base ne $upstream);
}
@@ -473,7 +487,7 @@ sub diff_index {
sub diff_refs {
my $filter = shift;
my $ref1 = shift || 'HEAD';
- my $ref2 = shift || 'FETCH_HEAD';
+ my $ref2 = shift || '@{upstream}';
my $fh= git_pipe ( 'diff', "--diff-filter=$filter", '--name-only',
$ref1, $ref2);
@@ -561,10 +575,11 @@ git. Any extra arguments are used (one per line) as a commit message.
push local nmbug git state to remote repo
-=item B<pull> [remote]
+=item B<pull> [remote] [branch]
pull (merge) remote repo changes to notmuch. B<pull> is equivalent to
-B<fetch> followed by B<merge>.
+B<fetch> followed by B<merge>. The default remote is C<origin>, and
+the default branch is C<master>.
=back
@@ -572,6 +587,12 @@ B<fetch> followed by B<merge>.
=over 8
+=item B<clone> repository
+
+Create a local nmbug repository from a remote source. This wraps
+C<git clone --bare>, adding some configuration adjustments to setup
+remote-tracking branches and upstreams.
+
=item B<checkout>
Update the notmuch database from git. This is mainly useful to discard
@@ -589,12 +610,12 @@ print help [for subcommand]
=item B<log> [parameters]
A simple wrapper for git log. After running C<nmbug fetch>, you can
-inspect the changes with C<nmbug log HEAD..FETCH_HEAD>
+inspect the changes with C<nmbug log HEAD..@{upstream}>
-=item B<merge>
+=item B<merge> [commit]
-Merge changes from FETCH_HEAD into HEAD, and load the result into
-notmuch.
+Merge changes from C<commit> into HEAD, and load the result into
+notmuch. The default commit is C<@{upstream}>.
=item B<status>
--
1.8.3.2
More information about the notmuch
mailing list