[PATCH v5 2/9] parse-time-string: add a date/time parser to notmuch
Jani Nikula
jani at nikula.org
Sun Oct 28 15:30:58 PDT 2012
On Mon, 22 Oct 2012, Austin Clements <amdragon at MIT.EDU> wrote:
> Overall this looks pretty good to me, and I must say, this parser is
> amazingly flexible and copes well with a remarkably hostile grammar.
>
> A lot of little comments below (sorry if any of this ground has
> already been covered in the previous four versions).
Nope, apart from "postponed numbers are confusing".
> I do have one broad comment. While I'm all for ad hoc parsers for ad
> hoc grammars like dates, there is one piece of the literature I think
> this parser suffers for by ignoring: tokenizing. I think it would
> simplify a lot of this code if it did a tokenizing pass before the
> parsing pass. It doesn't have to be a serious tokenizer with
> streaming and keywords and token types and junk; just something that
> first splits the input into substrings, possibly just non-overlapping
> matches of [[:digit:]]+|[[:alpha:]]+|[-+:/.]. This would simplify the
> handling of postponed numbers because, with trivial lookahead in the
> token stream, you wouldn't have to postpone them. Likewise, it would
> eliminate last_field. It would simplify keyword matching because you
> wouldn't have to worry about matching substrings (I spent a long time
> staring at that code before I figured out what it would and wouldn't
> accept). Most important, I think it would make the parser more
> predictable for users; for example, the parser currently accepts
> things like "saturtoday" because it's aggressively single-pass.
I'll fix this to require a non-keyword character between keywords, but,
since you're not adamant about it, I'll pass adding the tokenizer, at
least for now.
> Quoth Jani Nikula on Oct 22 at 12:22 am:
>> Add a date/time parser to notmuch, to be used for adding date range
>> query support for notmuch lib later on. Add the parser to a directory
>> of its own to make it independent of the rest of the notmuch code
>> base.
>>
>> Signed-off-by: Jani Nikula <jani at nikula.org>
>> ---
>> Makefile | 2 +-
>> parse-time-string/Makefile | 5 +
>> parse-time-string/Makefile.local | 12 +
>> parse-time-string/README | 9 +
>> parse-time-string/parse-time-string.c | 1477 +++++++++++++++++++++++++++++++++
>> parse-time-string/parse-time-string.h | 102 +++
>> 6 files changed, 1606 insertions(+), 1 deletion(-)
>> create mode 100644 parse-time-string/Makefile
>> create mode 100644 parse-time-string/Makefile.local
>> create mode 100644 parse-time-string/README
>> create mode 100644 parse-time-string/parse-time-string.c
>> create mode 100644 parse-time-string/parse-time-string.h
>>
>> diff --git a/Makefile b/Makefile
>> index e5e2e3a..bb9c316 100644
>> --- a/Makefile
>> +++ b/Makefile
>> @@ -3,7 +3,7 @@
>> all:
>>
>> # List all subdirectories here. Each contains its own Makefile.local
>> -subdirs = compat completion emacs lib man util test
>> +subdirs = compat completion emacs lib man parse-time-string util test
>>
>> # We make all targets depend on the Makefiles themselves.
>> global_deps = Makefile Makefile.config Makefile.local \
>> diff --git a/parse-time-string/Makefile b/parse-time-string/Makefile
>> new file mode 100644
>> index 0000000..fa25832
>> --- /dev/null
>> +++ b/parse-time-string/Makefile
>> @@ -0,0 +1,5 @@
>> +all:
>> + $(MAKE) -C .. all
>> +
>> +.DEFAULT:
>> + $(MAKE) -C .. $@
>> diff --git a/parse-time-string/Makefile.local b/parse-time-string/Makefile.local
>> new file mode 100644
>> index 0000000..53534f3
>> --- /dev/null
>> +++ b/parse-time-string/Makefile.local
>> @@ -0,0 +1,12 @@
>> +dir := parse-time-string
>> +extra_cflags += -I$(srcdir)/$(dir)
>> +
>> +libparse-time-string_c_srcs := $(dir)/parse-time-string.c
>> +
>> +libparse-time-string_modules := $(libparse-time-string_c_srcs:.c=.o)
>> +
>> +$(dir)/libparse-time-string.a: $(libparse-time-string_modules)
>> + $(call quiet,AR) rcs $@ $^
>> +
>> +SRCS := $(SRCS) $(libparse-time-string_c_srcs)
>> +CLEAN := $(CLEAN) $(libparse-time-string_modules) $(dir)/libparse-time-string.a
>> diff --git a/parse-time-string/README b/parse-time-string/README
>> new file mode 100644
>> index 0000000..300ff1f
>> --- /dev/null
>> +++ b/parse-time-string/README
>> @@ -0,0 +1,9 @@
>> +PARSE TIME STRING
>> +=================
>> +
>> +parse_time_string() is a date/time parser originally written for
>> +notmuch by Jani Nikula <jani at nikula.org>. However, there is nothing
>> +notmuch specific in it, and it should be kept reusable for other
>> +projects, and ready to be packaged on its own as needed. Please do not
>> +add dependencies on or references to anything notmuch specific. The
>> +parser should only depend on the C library.
>> diff --git a/parse-time-string/parse-time-string.c b/parse-time-string/parse-time-string.c
>> new file mode 100644
>> index 0000000..942041a
>> --- /dev/null
>> +++ b/parse-time-string/parse-time-string.c
>> @@ -0,0 +1,1477 @@
>> +/*
>> + * parse time string - user friendly date and time parser
>> + * Copyright © 2012 Jani Nikula
>> + *
>> + * This program is free software: you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation, either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + *
>> + * Author: Jani Nikula <jani at nikula.org>
>> + */
>> +
>> +#include <assert.h>
>> +#include <ctype.h>
>> +#include <errno.h>
>> +#include <limits.h>
>> +#include <stdio.h>
>> +#include <stdarg.h>
>> +#include <stdbool.h>
>> +#include <stdlib.h>
>> +#include <string.h>
>> +#include <strings.h>
>> +#include <time.h>
>> +#include <sys/time.h>
>> +#include <sys/types.h>
>> +
>> +#include "parse-time-string.h"
>> +
>> +/*
>> + * IMPLEMENTATION DETAILS
>> + *
>> + * At a high level, the parsing is done in two phases: 1) actual
>> + * parsing of the input string and storing the parsed data into
>> + * 'struct state', and 2) processing of the data in 'struct state'
>> + * according to current time (or provided reference time) and
>> + * rounding. This is evident in the main entry point function
>> + * parse_time_string().
>> + *
>> + * 1) The parsing phase - parse_input()
>> + *
>> + * Parsing is greedy and happens from left to right. The parsing is as
>> + * unambiguous as possible; only unambiguous date/time formats are
>> + * accepted. Redundant or contradictory absolute date/time in the
>> + * input (e.g. date specified multiple times/ways) is not
>> + * accepted. Relative date/time on the other hand just accumulates if
>> + * present multiple times (e.g. "5 days 5 days" just turns into 10
>> + * days).
>> + *
>> + * Parsing decisions are made on the input format, not value. For
>> + * example, "20/5/2005" fails because the recognized format here is
>> + * MM/D/YYYY, even though the values would suggest DD/M/YYYY.
>> + *
>> + * Parsing is mostly stateless in the sense that parsing decisions are
>> + * not made based on the values of previously parsed data, or whether
>> + * certain data is present in the first place. (There are a few
>> + * exceptions to the latter part, though, such as parsing of time zone
>> + * that would otherwise look like plain time.)
>> + *
>> + * When the parser encounters a number that is not greedily parsed as
>> + * part of a format, the interpretation is postponed until the next
>> + * token is parsed. The parser for the next token may consume the
>> + * previously postponed number. For example, when parsing "20 May" the
>> + * meaning of "20" is not known until "May" is parsed. If the parser
>> + * for the next token does not consume the postponed number, the
>> + * number is handled as a "lone" number before parser for the next
>> + * token finishes.
>> + *
>> + * 2) The processing phase - create_output()
>> + *
>> + * Once the parser in phase 1 has finished, 'struct state' contains
>> + * all the information from the input string, and it's no longer
>> + * needed. Since the parser does not even handle the concept of "now",
>> + * the processing initializes the fields referring to the current
>> + * date/time.
>> + *
>> + * If requested, the result is rounded towards past or future. The
>> + * idea behind rounding is to support parsing date/time ranges in an
>> + * obvious way. For example, for a range defined as two dates (without
>> + * time), one would typically want to have an inclusive range from the
>> + * beginning of start date to the end of the end date. The caller
>> + * would use rounding towards past in the start date, and towards
>> + * future in the end date.
>> + *
>> + * The absolute date and time is shifted by the relative date and
>> + * time, and time zone adjustments are made. Daylight saving time
>> + * (DST) is specifically *not* handled at all.
>> + *
>> + * Finally, the result is stored to time_t.
>> + */
>> +
>> +#define unused(x) x __attribute__ ((unused))
>> +
>> +/* XXX: Redefine these to add i18n support. The keyword table uses
>> + * N_() to mark strings to be translated; they are accessed
>> + * dynamically using _(). */
>> +#define _(s) (s) /* i18n: define as gettext (s) */
>> +#define N_(s) (s) /* i18n: define as gettext_noop (s) */
>> +
>> +#define ARRAY_SIZE(a) (sizeof (a) / sizeof (a[0]))
>> +
>> +/*
>> + * Field indices in the tm and set arrays of struct state.
>> + *
>> + * NOTE: There's some code that depends on the ordering of this enum.
>> + */
>> +enum field {
>> + /* Keep SEC...YEAR in this order. */
>> + TM_ABS_SEC, /* seconds */
>> + TM_ABS_MIN, /* minutes */
>> + TM_ABS_HOUR, /* hours */
>> + TM_ABS_MDAY, /* day of the month */
>> + TM_ABS_MON, /* month */
>> + TM_ABS_YEAR, /* year */
>> +
>> + TM_ABS_WDAY, /* day of the week. special: may be relative */
>
> Given that this may be relative, should it really be called
> TM_ABS_WDAY?
Will change to TM_WDAY.
>> + TM_ABS_ISDST, /* daylight saving time */
>> +
>> + TM_AMPM, /* am vs. pm */
>> + TM_TZ, /* timezone in minutes */
>> +
>> + /* Keep SEC...YEAR in this order. */
>> + TM_REL_SEC, /* seconds relative to absolute or reference time */
>> + TM_REL_MIN, /* minutes ... */
>> + TM_REL_HOUR, /* hours ... */
>> + TM_REL_DAY, /* days ... */
>> + TM_REL_MON, /* months ... */
>> + TM_REL_YEAR, /* years ... */
>> + TM_REL_WEEK, /* weeks ... */
>> +
>> + TM_NONE, /* not a field */
>> +
>> + TM_SIZE = TM_NONE,
>> + TM_FIRST_ABS = TM_ABS_SEC,
>> + TM_FIRST_REL = TM_REL_SEC,
>> +};
>> +
>> +/* Values for the set array of struct state. */
>> +enum field_set {
>> + FIELD_UNSET, /* The field has not been touched by parser. */
>> + FIELD_SET, /* The field has been set by parser. */
>> + FIELD_NOW, /* The field will be set to reference time. */
>> +};
>> +
>> +static enum field
>> +next_abs_field (enum field field)
>> +{
>> + /* NOTE: Depends on the enum ordering. */
>> + return field < TM_ABS_YEAR ? field + 1 : TM_NONE;
>> +}
>> +
>> +static enum field
>> +abs_to_rel_field (enum field field)
>> +{
>> + assert (field <= TM_ABS_YEAR);
>> +
>> + /* NOTE: Depends on the enum ordering. */
>> + return field + (TM_FIRST_REL - TM_FIRST_ABS);
>> +}
>> +
>> +/* Get epoch value for field. */
>
> Explain what an "epoch value" for a field is.
Will do.
>> +static int
>> +field_epoch (enum field field)
>> +{
>> + if (field == TM_ABS_MDAY || field == TM_ABS_MON)
>> + return 1;
>> + else if (field == TM_ABS_YEAR)
>> + return 1970;
>> + else
>> + return 0;
>> +}
>> +
>> +/* The parsing state. */
>> +struct state {
>> + int tm[TM_SIZE]; /* parsed date and time */
>> + enum field_set set[TM_SIZE]; /* set status of tm */
>> +
>> + enum field last_field; /* Previously set field. */
>> + char delim;
>> +
>> + int postponed_length; /* Number of digits in postponed value. */
>> + int postponed_value;
>> + char postponed_delim; /* The delimiter preceding postponed number. */
>> +};
>> +
>> +/*
>> + * Helpers for postponed numbers.
>> + *
>> + * postponed_length is the number of digits in postponed value. 0
>> + * means there is no postponed number. -1 means there is a postponed
>> + * number, but it comes from a keyword, and it doesn't have digits.
>> + */
>> +static int
>> +get_postponed_length (struct state *state)
>> +{
>> + return state->postponed_length;
>> +}
>> +
>> +/*
>> + * Consume a previously postponed number. Return true if a number was
>> + * in fact postponed, false otherwise. Store the postponed number's
>> + * value in *v, length in the input string in *n (or -1 if the number
>> + * was written out and parsed as a keyword), and the preceding
>> + * delimiter to *d.
>
> Mention that v, n, and d are unchanged if no number is postponed? You
> exploit this for default values elsewhere in the code.
Will do.
>> + */
>> +static bool
>> +get_postponed_number (struct state *state, int *v, int *n, char *d)
>
> Maybe "consume_postponed_number" to emphasize that this function has
> side-effects (and isn't simply a "getter")?
Agreed.
>> +{
>> + if (!state->postponed_length)
>> + return false;
>> +
>> + if (n)
>> + *n = state->postponed_length;
>> +
>> + if (v)
>> + *v = state->postponed_value;
>> +
>> + if (d)
>> + *d = state->postponed_delim;
>> +
>> + state->postponed_length = 0;
>> + state->postponed_value = 0;
>> + state->postponed_delim = 0;
>> +
>> + return true;
>> +}
>> +
>> +static int parse_postponed_number (struct state *state, enum field next_field);
>> +
>> +/*
>> + * Postpone a number to be handled later. If one exists already,
>> + * handle it first. n may be -1 to indicate a keyword that has no
>> + * number length.
>> + */
>> +static int
>> +set_postponed_number (struct state *state, int v, int n)
>> +{
>> + int r;
>> + char d = state->delim;
>> +
>> + /* Parse a previously postponed number, if any. */
>> + r = parse_postponed_number (state, TM_NONE);
>> + if (r)
>> + return r;
>> +
>> + state->postponed_length = n;
>> + state->postponed_value = v;
>> + state->postponed_delim = d;
>> +
>> + return 0;
>> +}
>> +
>> +static void
>> +set_delim (struct state *state, char delim)
>> +{
>> + state->delim = delim;
>> +}
>> +
>> +static void
>> +unset_delim (struct state *state)
>> +{
>> + state->delim = 0;
>> +}
>> +
>> +/*
>> + * Field set/get/mod helpers.
>> + */
>> +
>> +/* Return true if field has been set. */
>> +static bool
>> +is_field_set (struct state *state, enum field field)
>> +{
>> + assert (field < ARRAY_SIZE (state->tm));
>> +
>> + return field < ARRAY_SIZE (state->set) &&
>
> state->tm and state->set are the same size, so this will always by
> true given that the assert hasn't fired. Is this just defensive
> programming?
This is leftover from when state->tm and state->set weren't the same
size. Will clean up the asserts and checks.
>> + state->set[field] != FIELD_UNSET;
>> +}
>> +
>> +static void
>> +unset_field (struct state *state, enum field field)
>> +{
>> + assert (field < ARRAY_SIZE (state->tm));
>> +
>> + state->set[field] = FIELD_UNSET;
>> + state->tm[field] = 0;
>> +}
>> +
>> +/*
>> + * Set field to value. A field can only be set once to ensure the
>> + * input does not contain redundant and potentially conflicting data.
>> + */
>> +static int
>> +set_field (struct state *state, enum field field, int value)
>> +{
>> + int r;
>> +
>> + assert (field < ARRAY_SIZE (state->tm));
>> +
>> + /* Fields can only be set once. */
>> + if (field < ARRAY_SIZE (state->set) && state->set[field] != FIELD_UNSET)
>
> Same comment about array sizes. Also, this should probably call
> is_field_set instead of open-coding it (which would make the array
> size check even more redundant!)
Agreed.
>> + return -PARSE_TIME_ERR_ALREADYSET;
>> +
>> + state->set[field] = FIELD_SET;
>> +
>> + /* Parse a previously postponed number, if any. */
>> + r = parse_postponed_number (state, field);
>
> I don't understand the big picture with postponed number handling yet,
> but is it worth mentioning in this function's doc comment that it
> processes postponed numbers?
>
>> + if (r)
>> + return r;
>> +
>> + unset_delim (state);
>> +
>> + state->tm[field] = value;
>> + state->last_field = field;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Mark n fields in fields to be set to the reference date/time in the
>> + * specified time zone, or local timezone if not specified. The fields
>> + * will be initialized after parsing is complete and timezone is
>> + * known.
>> + */
>> +static int
>> +set_fields_to_now (struct state *state, enum field *fields, size_t n)
>> +{
>> + size_t i;
>> + int r;
>> +
>> + for (i = 0; i < n; i++) {
>> + r = set_field (state, fields[i], 0);
>> + if (r)
>> + return r;
>> + state->set[fields[i]] = FIELD_NOW;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Modify field by adding value to it. To be used on relative fields,
>> + * which can be modified multiple times (to accumulate). */
>> +static int
>> +mod_field (struct state *state, enum field field, int value)
>
> add_to_field?
Agreed.
>> +{
>> + int r;
>> +
>> + assert (field < ARRAY_SIZE (state->tm)); /* assert relative??? */
>> +
>> + if (field < ARRAY_SIZE (state->set))
>
> Another redundant check?
Yes.
>> + state->set[field] = FIELD_SET;
>> +
>> + /* Parse a previously postponed number, if any. */
>> + r = parse_postponed_number (state, field);
>
> This postponed number stuff is getting really confusing...
Ouch...
>> + if (r)
>> + return r;
>> +
>> + unset_delim (state);
>> +
>> + state->tm[field] += value;
>> + state->last_field = field;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Get field value. Make sure the field is set before query. It's most
>> + * likely an error to call this while parsing (for example fields set
>> + * as FIELD_NOW will only be set to some value after parsing).
>> + */
>> +static int
>> +get_field (struct state *state, enum field field)
>> +{
>> + assert (field < ARRAY_SIZE (state->tm));
>
> Assert that the field is set?
The relative fields might not be set, but have 0 value by default,
during create_output().
>> +
>> + return state->tm[field];
>> +}
>> +
>> +/*
>> + * Validity checkers.
>> + */
>> +static bool is_valid_12hour (int h)
>> +{
>> + return h >= 0 && h <= 12;
>
> h >= 1?
Will fix.
>> +}
>> +
>> +static bool is_valid_time (int h, int m, int s)
>> +{
>> + /* Allow 24:00:00 to denote end of day. */
>> + if (h == 24 && m == 0 && s == 0)
>> + return true;
>> +
>> + return h >= 0 && h <= 23 && m >= 0 && m <= 59 && s >= 0 && s <= 59;
>> +}
>> +
>> +static bool is_valid_mday (int mday)
>> +{
>> + return mday >= 1 && mday <= 31;
>> +}
>> +
>> +static bool is_valid_mon (int mon)
>> +{
>> + return mon >= 1 && mon <= 12;
>> +}
>> +
>> +static bool is_valid_year (int year)
>> +{
>> + return year >= 1970;
>> +}
>> +
>> +static bool is_valid_date (int year, int mon, int mday)
>> +{
>> + return is_valid_year (year) && is_valid_mon (mon) && is_valid_mday (mday);
>> +}
>> +
>> +/* Unset indicator for time and date set helpers. */
>> +#define UNSET -1
>> +
>> +/* Time set helper. No input checking. Use UNSET (-1) to leave unset. */
>> +static int
>> +set_abs_time (struct state *state, int hour, int min, int sec)
>> +{
>> + int r;
>> +
>> + if (hour != UNSET) {
>> + if ((r = set_field (state, TM_ABS_HOUR, hour)))
>> + return r;
>> + }
>> +
>> + if (min != UNSET) {
>> + if ((r = set_field (state, TM_ABS_MIN, min)))
>> + return r;
>> + }
>> +
>> + if (sec != UNSET) {
>> + if ((r = set_field (state, TM_ABS_SEC, sec)))
>> + return r;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Date set helper. No input checking. Use UNSET (-1) to leave unset. */
>> +static int
>> +set_abs_date (struct state *state, int year, int mon, int mday)
>> +{
>> + int r;
>> +
>> + if (year != UNSET) {
>> + if ((r = set_field (state, TM_ABS_YEAR, year)))
>> + return r;
>> + }
>> +
>> + if (mon != UNSET) {
>> + if ((r = set_field (state, TM_ABS_MON, mon)))
>> + return r;
>> + }
>> +
>> + if (mday != UNSET) {
>> + if ((r = set_field (state, TM_ABS_MDAY, mday)))
>> + return r;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Keyword parsing and handling.
>> + */
>> +struct keyword;
>> +typedef int (*setter_t)(struct state *state, struct keyword *kw);
>> +
>> +struct keyword {
>> + const char *name; /* keyword */
>> + enum field field; /* field to set, or FIELD_NONE if N/A */
>> + int value; /* value to set, or 0 if N/A */
>> + setter_t set; /* function to use for setting, if non-NULL */
>> +};
>> +
>> +/*
>> + * Setter callback functions for keywords.
>> + */
>> +static int
>> +kw_set_default (struct state *state, struct keyword *kw)
>
> It took me a while to figure out what the name of this had to do with
> the action it performs, then I realized that it's never used in the
> table and only called when set is NULL. Given that, I think it would
> make more sense to just put the set_field call in place of the one
> current call to kw_set_default. Currently, this seems like one
> indirection too much.
Agreed.
>> +{
>> + return set_field (state, kw->field, kw->value);
>> +}
>> +
>> +static int
>> +kw_set_rel (struct state *state, struct keyword *kw)
>> +{
>> + int multiplier = 1;
>> +
>> + /* Get a previously set multiplier, if any. */
>> + get_postponed_number (state, &multiplier, NULL, NULL);
>> +
>> + /* Accumulate relative field values. */
>> + return mod_field (state, kw->field, multiplier * kw->value);
>> +}
>> +
>> +static int
>> +kw_set_number (struct state *state, struct keyword *kw)
>> +{
>> + /* -1 = no length, from keyword. */
>> + return set_postponed_number (state, kw->value, -1);
>> +}
>> +
>> +static int
>> +kw_set_month (struct state *state, struct keyword *kw)
>> +{
>> + int n = get_postponed_length (state);
>> +
>> + /* Consume postponed number if it could be mday. This handles "20
>> + * January". */
>> + if (n == 1 || n == 2) {
>
> Should this be (n && is_valid_mday (state->postponed_value))? It
> seems a little odd that postponed numbers three digits or longer are
> treated as independent, but two digits numbers > 31 are an error.
I'm inclined to treating any one- or two-digit number preceding a month
name as day of the month, and not letting the value affect that
decision.
>> + int r, v;
>> +
>> + get_postponed_number (state, &v, NULL, NULL);
>> +
>> + if (!is_valid_mday (v))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + r = set_field (state, TM_ABS_MDAY, v);
>> + if (r)
>> + return r;
>> + }
>> +
>> + return set_field (state, kw->field, kw->value);
>> +}
>> +
>> +static int
>> +kw_set_ampm (struct state *state, struct keyword *kw)
>> +{
>> + int n = get_postponed_length (state);
>> +
>> + /* Consume postponed number if it could be hour. This handles
>> + * "5pm". */
>> + if (n == 1 || n == 2) {
>
> Same comment as for kw_set_month.
Same as above.
>> + int r, v;
>> +
>> + get_postponed_number (state, &v, NULL, NULL);
>> +
>> + if (!is_valid_12hour (v))
>> + return -PARSE_TIME_ERR_INVALIDTIME;
>> +
>> + r = set_abs_time (state, v, 0, 0);
>> + if (r)
>> + return r;
>> + }
>> +
>> + return set_field (state, kw->field, kw->value);
>> +}
>> +
>> +static int
>> +kw_set_timeofday (struct state *state, struct keyword *kw)
>> +{
>> + return set_abs_time (state, kw->value, 0, 0);
>> +}
>> +
>> +static int
>> +kw_set_today (struct state *state, unused (struct keyword *kw))
>> +{
>> + enum field fields[] = { TM_ABS_YEAR, TM_ABS_MON, TM_ABS_MDAY };
>> +
>> + return set_fields_to_now (state, fields, ARRAY_SIZE (fields));
>> +}
>> +
>> +static int
>> +kw_set_now (struct state *state, unused (struct keyword *kw))
>> +{
>> + enum field fields[] = { TM_ABS_HOUR, TM_ABS_MIN, TM_ABS_SEC };
>> +
>> + return set_fields_to_now (state, fields, ARRAY_SIZE (fields));
>> +}
>> +
>> +static int
>> +kw_set_ordinal (struct state *state, struct keyword *kw)
>> +{
>> + int n, v;
>> +
>> + /* Require a postponed number. */
>> + if (!get_postponed_number (state, &v, &n, NULL))
>> + return -PARSE_TIME_ERR_DATEFORMAT;
>> +
>> + /* Ordinals are mday. */
>> + if (n != 1 && n != 2)
>
> Is this redundant with your is_valid_mday test below?
No, this rejects stuff like "005th" and "five th".
>> + return -PARSE_TIME_ERR_DATEFORMAT;
>> +
>> + /* Be strict about st, nd, rd, and lax about th. */
>> + if (strcasecmp (kw->name, "st") == 0 && v != 1 && v != 21 && v != 31)
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> + else if (strcasecmp (kw->name, "nd") == 0 && v != 2 && v != 22)
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> + else if (strcasecmp (kw->name, "rd") == 0 && v != 3 && v != 23)
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> + else if (strcasecmp (kw->name, "th") == 0 && !is_valid_mday (v))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + return set_field (state, TM_ABS_MDAY, v);
>> +}
>> +
>> +/*
>> + * Accepted keywords.
>> + *
>> + * A keyword may optionally contain a '|' to indicate the minimum
>> + * match length. Without one, full match is required. It's advisable
>> + * to keep the minimum match parts unique across all keywords.
>> + *
>> + * If keyword begins with upper case letter, then the matching will be
>> + * case sensitive. Otherwise the matching is case insensitive.
>> + *
>> + * If setter is NULL, set_default will be used.
>> + *
>> + * Note: Order matters. Matching is greedy, longest match is used, but
>> + * of equal length matches the first one is used, unless there's an
>> + * equal length case sensitive match which trumps case insensitive
>> + * matches.
>
> If you do have a tokenizer (or disallow mashing keywords together),
> then all of complexity arising from longest match goes away because
> the keyword token either will or won't match a keyword. If you also
> eliminate the rule for case sensitivity and put case-sensitive things
> before conflicting case-insensitive things (so put "M" before
> "m|inutes"), then you can simply use the first match.
At least one reason for going through the whole table is that if this
ever gets i18n support, the conflicting things might be different. While
order matters in principle, you should create the table so that it
really doesn't matter.
>
>> + */
>> +static struct keyword keywords[] = {
>> + /* Weekdays. */
>> + { N_("sun|day"), TM_ABS_WDAY, 0, NULL },
>> + { N_("mon|day"), TM_ABS_WDAY, 1, NULL },
>> + { N_("tue|sday"), TM_ABS_WDAY, 2, NULL },
>> + { N_("wed|nesday"), TM_ABS_WDAY, 3, NULL },
>> + { N_("thu|rsday"), TM_ABS_WDAY, 4, NULL },
>> + { N_("fri|day"), TM_ABS_WDAY, 5, NULL },
>> + { N_("sat|urday"), TM_ABS_WDAY, 6, NULL },
>> +
>> + /* Months. */
>> + { N_("jan|uary"), TM_ABS_MON, 1, kw_set_month },
>> + { N_("feb|ruary"), TM_ABS_MON, 2, kw_set_month },
>> + { N_("mar|ch"), TM_ABS_MON, 3, kw_set_month },
>> + { N_("apr|il"), TM_ABS_MON, 4, kw_set_month },
>> + { N_("may"), TM_ABS_MON, 5, kw_set_month },
>> + { N_("jun|e"), TM_ABS_MON, 6, kw_set_month },
>> + { N_("jul|y"), TM_ABS_MON, 7, kw_set_month },
>> + { N_("aug|ust"), TM_ABS_MON, 8, kw_set_month },
>> + { N_("sep|tember"), TM_ABS_MON, 9, kw_set_month },
>> + { N_("oct|ober"), TM_ABS_MON, 10, kw_set_month },
>> + { N_("nov|ember"), TM_ABS_MON, 11, kw_set_month },
>> + { N_("dec|ember"), TM_ABS_MON, 12, kw_set_month },
>> +
>> + /* Durations. */
>> + { N_("y|ears"), TM_REL_YEAR, 1, kw_set_rel },
>> + { N_("w|eeks"), TM_REL_WEEK, 1, kw_set_rel },
>> + { N_("d|ays"), TM_REL_DAY, 1, kw_set_rel },
>> + { N_("h|ours"), TM_REL_HOUR, 1, kw_set_rel },
>> + { N_("hr|s"), TM_REL_HOUR, 1, kw_set_rel },
>> + { N_("m|inutes"), TM_REL_MIN, 1, kw_set_rel },
>> + /* M=months, m=minutes */
>> + { N_("M"), TM_REL_MON, 1, kw_set_rel },
>> + { N_("mins"), TM_REL_MIN, 1, kw_set_rel },
>> + { N_("mo|nths"), TM_REL_MON, 1, kw_set_rel },
>> + { N_("s|econds"), TM_REL_SEC, 1, kw_set_rel },
>> + { N_("secs"), TM_REL_SEC, 1, kw_set_rel },
>> +
>> + /* Numbers. */
>> + { N_("one"), TM_NONE, 1, kw_set_number },
>> + { N_("two"), TM_NONE, 2, kw_set_number },
>> + { N_("three"), TM_NONE, 3, kw_set_number },
>> + { N_("four"), TM_NONE, 4, kw_set_number },
>> + { N_("five"), TM_NONE, 5, kw_set_number },
>> + { N_("six"), TM_NONE, 6, kw_set_number },
>> + { N_("seven"), TM_NONE, 7, kw_set_number },
>> + { N_("eight"), TM_NONE, 8, kw_set_number },
>> + { N_("nine"), TM_NONE, 9, kw_set_number },
>> + { N_("ten"), TM_NONE, 10, kw_set_number },
>> + { N_("dozen"), TM_NONE, 12, kw_set_number },
>> + { N_("hundred"), TM_NONE, 100, kw_set_number },
>> +
>> + /* Special number forms. */
>> + { N_("this"), TM_NONE, 0, kw_set_number },
>> + { N_("last"), TM_NONE, 1, kw_set_number },
>> +
>> + /* Other special keywords. */
>> + { N_("yesterday"), TM_REL_DAY, 1, kw_set_rel },
>> + { N_("today"), TM_NONE, 0, kw_set_today },
>> + { N_("now"), TM_NONE, 0, kw_set_now },
>> + { N_("noon"), TM_NONE, 12, kw_set_timeofday },
>> + { N_("midnight"), TM_NONE, 0, kw_set_timeofday },
>> + { N_("am"), TM_AMPM, 0, kw_set_ampm },
>> + { N_("a.m."), TM_AMPM, 0, kw_set_ampm },
>> + { N_("pm"), TM_AMPM, 1, kw_set_ampm },
>> + { N_("p.m."), TM_AMPM, 1, kw_set_ampm },
>> + { N_("st"), TM_NONE, 0, kw_set_ordinal },
>> + { N_("nd"), TM_NONE, 0, kw_set_ordinal },
>> + { N_("rd"), TM_NONE, 0, kw_set_ordinal },
>> + { N_("th"), TM_NONE, 0, kw_set_ordinal },
>> +
>> + /* Timezone codes: offset in minutes. XXX: Add more codes. */
>> + { N_("pst"), TM_TZ, -8*60, NULL },
>> + { N_("mst"), TM_TZ, -7*60, NULL },
>> + { N_("cst"), TM_TZ, -6*60, NULL },
>> + { N_("est"), TM_TZ, -5*60, NULL },
>> + { N_("ast"), TM_TZ, -4*60, NULL },
>> + { N_("nst"), TM_TZ, -(3*60+30), NULL },
>> +
>> + { N_("gmt"), TM_TZ, 0, NULL },
>> + { N_("utc"), TM_TZ, 0, NULL },
>> +
>> + { N_("wet"), TM_TZ, 0, NULL },
>> + { N_("cet"), TM_TZ, 1*60, NULL },
>> + { N_("eet"), TM_TZ, 2*60, NULL },
>> + { N_("fet"), TM_TZ, 3*60, NULL },
>> +
>> + { N_("wat"), TM_TZ, 1*60, NULL },
>> + { N_("cat"), TM_TZ, 2*60, NULL },
>> + { N_("eat"), TM_TZ, 3*60, NULL },
>> +};
>> +
>> +/*
>> + * Compare strings s and keyword. Return number of matching chars on
>> + * match, 0 for no match. Match must be at least n chars, or all of
>> + * keyword if n < 0, otherwise it's not a match. Use match_case for
>> + * case sensitive matching.
>> + */
>> +static size_t
>> +match_keyword (const char *s, const char *keyword, ssize_t n, bool match_case)
>> +{
>> + ssize_t i;
>> +
>> + if (!n)
>> + return 0;
>> +
>> + for (i = 0; *s && *keyword; i++, s++, keyword++) {
>> + if (match_case) {
>> + if (*s != *keyword)
>
> The pointer arithmetic doesn't seem to buy anything here. What about
> just looping over i and using s[i] and keyword[i]?
The pointer arithmetic will be useful when I implement your other
suggestion of handling '|' here. ;) Otherwise, I'd need two index
variables.
>
>> + break;
>> + } else {
>> + if (tolower ((unsigned char) *s) !=
>> + tolower ((unsigned char) *keyword))
>
> I don't think the cast to unsigned char is necessary.
As discussed on IRC, pedantically it is necessary, as ctype.h functions
accept an int that must have the value of an unsigned char or EOF, and
char might be signed.
>> + break;
>> + }
>> + }
>> +
>> + if (n > 0)
>> + return i < n ? 0 : i;
>> + else
>> + return *keyword ? 0 : i;
>> +}
>> +
>> +/*
>> + * Parse a keyword. Return < 0 on error, number of parsed chars on
>> + * success.
>> + */
>> +static ssize_t
>> +parse_keyword (struct state *state, const char *s)
>> +{
>> + unsigned int i;
>> + size_t n, max_n = 0;
>> + struct keyword *kw = NULL;
>> + int r;
>> +
>> + /* Match longest keyword */
>> + for (i = 0; i < ARRAY_SIZE (keywords); i++) {
>> + /* Match case if keyword begins with upper case letter. */
>> + bool mcase = isupper ((unsigned char) keywords[i].name[0]);
>
> Same with this cast.
>
>> + ssize_t minlen = -1;
>> + char keyword[128];
>> + char *p;
>> +
>> + strncpy (keyword, _(keywords[i].name), sizeof (keyword));
>> +
>> + /* Truncate too long keywords. XXX: Make this dynamic? */
>> + keyword[sizeof (keyword) - 1] = '\0';
>> +
>> + /* Minimum match length. */
>> + p = strchr (keyword, '|');
>> + if (p) {
>> + minlen = p - keyword;
>> +
>> + /* Remove the minimum match length separator. */
>> + memmove (p, p + 1, strlen (p + 1) + 1);
>> + }
>
> Would it make more sense to make match_keyword aware of the |
> character? Then you wouldn't need this dance with copying the keyword
> into a scratch buffer. I'm thinking something like (untested)
Agreed.
> static size_t
> match_keyword (const char *s, const char *keyword, bool match_case)
> {
> size_t i;
> bool prefix_matched = false;
>
> for (i = 0; *s && *keyword; i++, s++, keyword++) {
> if (*keyword == '|') {
> prefix_matched = true;
> ++keyword;
> }
> if (match_case && *s != *keyword)
> return 0;
> else if (tolower (*s) != tolower (*keyword))
> return 0;
> }
>
> if (!*keyword || prefix_matched)
> return i;
> return 0;
> }
>
>> +
>> + n = match_keyword (s, keyword, minlen, mcase);
>> + if (n > max_n || (n == max_n && mcase)) {
>> + max_n = n;
>> + kw = &keywords[i];
>> + }
>> + }
>> +
>> + if (!kw)
>> + return -PARSE_TIME_ERR_KEYWORD;
>> +
>> + if (kw->set)
>> + r = kw->set (state, kw);
>> + else
>> + r = kw_set_default (state, kw);
>> +
>> + if (r < 0)
>> + return r;
>> +
>> + return max_n;
>> +}
>> +
>> +/*
>> + * Non-keyword parsers and their helpers.
>> + */
>> +
>> +static int
>> +set_user_tz (struct state *state, char sign, int hour, int min)
>> +{
>> + int tz = hour * 60 + min;
>> +
>> + assert (sign == '+' || sign == '-');
>> +
>> + if (hour < 0 || hour > 14 || min < 0 || min > 59 || min % 15)
>
> Good to see you're not forgetting our Kiribati notmuch user base.
:)
>> + return -PARSE_TIME_ERR_INVALIDTIME;
>> +
>> + if (sign == '-')
>> + tz = -tz;
>> +
>> + return set_field (state, TM_TZ, tz);
>> +}
>> +
>> +/*
>> + * Parse a previously postponed number if one exists. Independent
>> + * parsing of a postponed number when it wasn't consumed during
>> + * parsing of the following token.
>> + */
>> +static int
>> +parse_postponed_number (struct state *state, unused (enum field next_field))
>> +{
>> + int v, n;
>> + char d;
>> +
>> + /* Bail out if there's no postponed number. */
>> + if (!get_postponed_number (state, &v, &n, &d))
>> + return 0;
>> +
>> + if (n == 1 || n == 2) {
>> + /* Notable exception: Previous field affects parsing. This
>> + * handles "January 20". */
>> + if (state->last_field == TM_ABS_MON) {
>> + /* D[D] */
>> + if (!is_valid_mday (v))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + return set_field (state, TM_ABS_MDAY, v);
>> + } else if (n == 2) {
>> + /* XXX: Only allow if last field is hour, min, or sec? */
>> + if (d == '+' || d == '-') {
>> + /* +/-HH */
>> + return set_user_tz (state, d, v, 0);
>> + }
>> + }
>> + } else if (n == 4) {
>> + /* Notable exception: Value affects parsing. Time zones are
>> + * always at most 1400 and we don't understand years before
>> + * 1970. */
>> + if (!is_valid_year (v)) {
>> + if (d == '+' || d == '-') {
>> + /* +/-HHMM */
>> + return set_user_tz (state, d, v / 100, v % 100);
>> + }
>> + } else {
>> + /* YYYY */
>> + return set_field (state, TM_ABS_YEAR, v);
>> + }
>> + } else if (n == 6) {
>> + /* HHMMSS */
>> + int hour = v / 10000;
>> + int min = (v / 100) % 100;
>> + int sec = v % 100;
>> +
>> + if (!is_valid_time (hour, min, sec))
>> + return -PARSE_TIME_ERR_INVALIDTIME;
>> +
>> + return set_abs_time (state, hour, min, sec);
>> + } else if (n == 8) {
>> + /* YYYYMMDD */
>> + int year = v / 10000;
>> + int mon = (v / 100) % 100;
>> + int mday = v % 100;
>> +
>> + if (!is_valid_date (year, mon, mday))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + return set_abs_date (state, year, mon, mday);
>> + } else {
>> + return -PARSE_TIME_ERR_FORMAT;
>
> No need for the else block, given the return at the end.
Will fix.
>> + }
>> +
>> + return -PARSE_TIME_ERR_FORMAT;
>> +}
>> +
>> +static int tm_get_field (const struct tm *tm, enum field field);
>> +
>> +static int
>> +set_timestamp (struct state *state, time_t t)
>> +{
>> + struct tm tm;
>> + enum field f;
>> + int r;
>> +
>> + if (gmtime_r (&t, &tm) == NULL)
>> + return -PARSE_TIME_ERR_LIB;
>> +
>> + for (f = TM_ABS_SEC; f != TM_NONE; f = next_abs_field (f)) {
>> + r = set_field (state, f, tm_get_field (&tm, f));
>> + if (r)
>> + return r;
>> + }
>> +
>> + r = set_field (state, TM_TZ, 0);
>> + if (r)
>> + return r;
>> +
>> + /* XXX: Prevent TM_AMPM with timestamp, e.g. "@123456 pm" */
>> +
>> + return 0;
>> +}
>> +
>> +/* Parse a single number. Typically postpone parsing until later. */
>> +static int
>> +parse_single_number (struct state *state, unsigned long v,
>> + unsigned long n)
>> +{
>> + assert (n);
>> +
>> + if (state->delim == '@')
>> + return set_timestamp (state, (time_t) v);
>> +
>> + if (v > INT_MAX)
>> + return -PARSE_TIME_ERR_FORMAT;
>> +
>> + return set_postponed_number (state, v, n);
>> +}
>> +
>> +static bool
>> +is_time_sep (char c)
>> +{
>> + return c == ':';
>> +}
>> +
>> +static bool
>> +is_date_sep (char c)
>> +{
>> + return c == '/' || c == '-' || c == '.';
>> +}
>> +
>> +static bool
>> +is_sep (char c)
>> +{
>> + return is_time_sep (c) || is_date_sep (c);
>> +}
>> +
>> +/* Two-digit year: 00...69 is 2000s, 70...99 1900s, if n == 0 keep
>> + * unset. */
>> +static int
>> +expand_year (unsigned long year, size_t n)
>> +{
>> + if (n == 2) {
>> + return (year < 70 ? 2000 : 1900) + year;
>> + } else if (n == 4) {
>> + return year;
>> + } else {
>> + return UNSET;
>> + }
>> +}
>> +
>> +/* Parse a date number triplet. */
>> +static int
>> +parse_date (struct state *state, char sep,
>> + unsigned long v1, unsigned long v2, unsigned long v3,
>> + size_t n1, size_t n2, size_t n3)
>> +{
>> + int year = UNSET, mon = UNSET, mday = UNSET;
>> +
>> + assert (is_date_sep (sep));
>> +
>> + switch (sep) {
>> + case '/': /* Date: M[M]/D[D][/YY[YY]] or M[M]/YYYY */
>> + if (n1 != 1 && n1 != 2)
>> + return -PARSE_TIME_ERR_DATEFORMAT;
>> +
>> + if ((n2 == 1 || n2 == 2) && (n3 == 0 || n3 == 2 || n3 == 4)) {
>> + /* M[M]/D[D][/YY[YY]] */
>> + year = expand_year (v3, n3);
>> + mon = v1;
>> + mday = v2;
>> + } else if (n2 == 4 && n3 == 0) {
>> + /* M[M]/YYYY */
>> + year = v2;
>> + mon = v1;
>> + } else {
>> + return -PARSE_TIME_ERR_DATEFORMAT;
>> + }
>> + break;
>> +
>> + case '-': /* Date: YYYY-MM[-DD] or DD-MM[-YY[YY]] or MM-YYYY */
>> + if (n1 == 4 && n2 == 2 && (n3 == 0 || n3 == 2)) {
>> + /* YYYY-MM[-DD] */
>> + year = v1;
>> + mon = v2;
>> + if (n3)
>> + mday = v3;
>> + } else if (n1 == 2 && n2 == 2 && (n3 == 0 || n3 == 2 || n3 == 4)) {
>> + /* DD-MM[-YY[YY]] */
>> + year = expand_year (v3, n3);
>> + mon = v2;
>> + mday = v1;
>> + } else if (n1 == 2 && n2 == 4 && n3 == 0) {
>> + /* MM-YYYY */
>> + year = v2;
>> + mon = v1;
>> + } else {
>> + return -PARSE_TIME_ERR_DATEFORMAT;
>> + }
>> + break;
>> +
>> + case '.': /* Date: D[D].M[M][.[YY[YY]]] */
>> + if ((n1 != 1 && n1 != 2) || (n2 != 1 && n2 != 2) ||
>> + (n3 != 0 && n3 != 2 && n3 != 4))
>> + return -PARSE_TIME_ERR_DATEFORMAT;
>> +
>> + year = expand_year (v3, n3);
>> + mon = v2;
>> + mday = v1;
>> + break;
>> + }
>> +
>> + if (year != UNSET && !is_valid_year (year))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + if (mon != UNSET && !is_valid_mon (mon))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + if (mday != UNSET && !is_valid_mday (mday))
>> + return -PARSE_TIME_ERR_INVALIDDATE;
>> +
>> + return set_abs_date (state, year, mon, mday);
>> +}
>> +
>> +/* Parse a time number triplet. */
>> +static int
>> +parse_time (struct state *state, char sep,
>> + unsigned long v1, unsigned long v2, unsigned long v3,
>> + size_t n1, size_t n2, size_t n3)
>> +{
>> + assert (is_time_sep (sep));
>> +
>> + if ((n1 != 1 && n1 != 2) || n2 != 2 || (n3 != 0 && n3 != 2))
>> + return -PARSE_TIME_ERR_TIMEFORMAT;
>> +
>> + /*
>> + * Notable exception: Previously set fields affect
>> + * parsing. Interpret (+|-)HH:MM as time zone only if hour and
>> + * minute have been set.
>> + *
>> + * XXX: This could be fixed by restricting the delimiters
>> + * preceding time. For '+' it would be justified, but for '-' it
>> + * might be inconvenient. However prefer to allow '-' as an
>> + * insignificant delimiter preceding time for convenience, and
>> + * handle '+' the same way for consistency between positive and
>> + * negative time zones.
>> + */
>> + if (is_field_set (state, TM_ABS_HOUR) &&
>> + is_field_set (state, TM_ABS_MIN) &&
>> + n1 == 2 && n2 == 2 && n3 == 0 &&
>> + (state->delim == '+' || state->delim == '-')) {
>> + return set_user_tz (state, state->delim, v1, v2);
>> + }
>> +
>> + if (!is_valid_time (v1, v2, v3))
>> + return -PARSE_TIME_ERR_INVALIDTIME;
>> +
>> + return set_abs_time (state, v1, v2, n3 ? v3 : 0);
>> +}
>> +
>> +/* strtoul helper that assigns length. */
>> +static unsigned long
>> +strtoul_len (const char *s, const char **endp, size_t *len)
>> +{
>> + unsigned long val = strtoul (s, (char **) endp, 10);
>
> This could technically get confused by really large numbers, but I
> don't know if that's worth worrying about.
I think I'll just ignore that for now.
>> +
>> + *len = *endp - s;
>> + return val;
>> +}
>> +
>> +/*
>> + * Parse a (group of) number(s). Return < 0 on error, number of parsed
>> + * chars on success.
>> + */
>> +static ssize_t
>> +parse_number (struct state *state, const char *s)
>> +{
>> + int r;
>> + unsigned long v1, v2, v3 = 0;
>> + size_t n1, n2, n3 = 0;
>> + const char *p = s;
>> + char sep;
>> +
>> + v1 = strtoul_len (p, &p, &n1);
>> +
>> + if (is_sep (*p) && isdigit ((unsigned char) *(p + 1))) {
>
> Unnecessary cast?
>
>> + sep = *p;
>> + v2 = strtoul_len (p + 1, &p, &n2);
>> + } else {
>> + /* A single number. */
>> + r = parse_single_number (state, v1, n1);
>> + if (r)
>> + return r;
>> +
>> + return p - s;
>
> I found the control flow here confusing. You might want to flip the
> two conditions so the single number return happens first and the rest
> of the code flows straight through:
Agreed.
> if (!is_sep (*p) || !isdigit (*(p + 1))) {
> ...
> return p - s;
> }
>
> sep = *p;
> ...
>
>> + }
>> +
>> + /* A group of two or three numbers? */
>> + if (*p == sep && isdigit ((unsigned char) *(p + 1)))
>> + v3 = strtoul_len (p + 1, &p, &n3);
>> +
>> + if (is_time_sep (sep))
>> + r = parse_time (state, sep, v1, v2, v3, n1, n2, n3);
>> + else
>> + r = parse_date (state, sep, v1, v2, v3, n1, n2, n3);
>> +
>> + if (r)
>> + return r;
>> +
>> + return p - s;
>> +}
>> +
>> +/*
>> + * Parse delimiter(s). Throw away all except the last one, which is
>> + * stored for parsing the next non-delimiter. Return < 0 on error,
>> + * number of parsed chars on success.
>> + *
>> + * XXX: We might want to be more strict here.
>> + */
>> +static ssize_t
>> +parse_delim (struct state *state, const char *s)
>> +{
>> + const char *p = s;
>> +
>> + /*
>> + * Skip non-alpha and non-digit, and store the last for further
>> + * processing.
>> + */
>> + while (*p && !isalnum ((unsigned char) *p)) {
>> + set_delim (state, *p);
>> + p++;
>> + }
>> +
>> + return p - s;
>> +}
>> +
>> +/*
>> + * Parse a date/time string. Return < 0 on error, number of parsed
>> + * chars on success.
>> + */
>> +static ssize_t
>> +parse_input (struct state *state, const char *s)
>> +{
>> + const char *p = s;
>> + ssize_t n;
>> + int r;
>> +
>> + while (*p) {
>> + if (isalpha ((unsigned char) *p)) {
>> + n = parse_keyword (state, p);
>> + } else if (isdigit ((unsigned char) *p)) {
>> + n = parse_number (state, p);
>> + } else {
>> + n = parse_delim (state, p);
>> + }
>> +
>> + if (n <= 0) {
>> + if (n == 0)
>> + n = -PARSE_TIME_ERR;
>> +
>> + return n;
>> + }
>> +
>> + p += n;
>> + }
>> +
>> + /* Parse a previously postponed number, if any. */
>> + r = parse_postponed_number (state, TM_NONE);
>> + if (r < 0)
>> + return r;
>> +
>> + return p - s;
>> +}
>> +
>> +/*
>> + * Processing the parsed input.
>> + */
>> +
>> +/*
>> + * Initialize reference time to tm. Use time zone in state if
>> + * specified, otherwise local time. Use now for reference time if
>> + * non-NULL, otherwise current time.
>> + */
>> +static int
>> +initialize_now (struct state *state, struct tm *tm, const time_t *now)
>
> Should tm be the last argument, since it's an out-argument?
Will change.
> Why is now a pointer? Just so it can be NULL?
Yes, coming all the way from the API.
>> +{
>> + time_t t;
>> +
>> + if (now) {
>> + t = *now;
>> + } else {
>> + if (time (&t) == (time_t) -1)
>> + return -PARSE_TIME_ERR_LIB;
>> + }
>> +
>> + if (is_field_set (state, TM_TZ)) {
>> + /* Some other time zone. */
>> +
>> + /* Adjust now according to the TZ. */
>> + t += get_field (state, TM_TZ) * 60;
>> +
>> + /* It's not gm, but this doesn't mess with the TZ. */
>> + if (gmtime_r (&t, tm) == NULL)
>> + return -PARSE_TIME_ERR_LIB;
>> + } else {
>> + /* Local time. */
>> + if (localtime_r (&t, tm) == NULL)
>> + return -PARSE_TIME_ERR_LIB;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Normalize tm according to mktime(3). Both mktime(3) and
>
> This comment could elaborate a bit on what it means to normalize a tm.
Agreed.
>> + * localtime_r(3) use local time, but they cancel each other out here,
>> + * making this function agnostic to time zone.
>> + */
>> +static int
>> +normalize_tm (struct tm *tm)
>> +{
>> + time_t t = mktime (tm);
>> +
>> + if (t == (time_t) -1)
>> + return -PARSE_TIME_ERR_LIB;
>> +
>> + if (!localtime_r (&t, tm))
>> + return -PARSE_TIME_ERR_LIB;
>
> Do you actually need this call to localtime_r or can you just return
> after the mktime modifies tm? Does this have to do with timezones?
Hmm, I'm not sure. I think I'll just keep it like this, because that's
the way it has worked for months...
>> +
>> + return 0;
>> +}
>> +
>> +/* Get field out of a struct tm. */
>> +static int
>> +tm_get_field (const struct tm *tm, enum field field)
>> +{
>> + switch (field) {
>> + case TM_ABS_SEC: return tm->tm_sec;
>> + case TM_ABS_MIN: return tm->tm_min;
>> + case TM_ABS_HOUR: return tm->tm_hour;
>> + case TM_ABS_MDAY: return tm->tm_mday;
>> + case TM_ABS_MON: return tm->tm_mon + 1; /* 0- to 1-based */
>> + case TM_ABS_YEAR: return 1900 + tm->tm_year;
>> + case TM_ABS_WDAY: return tm->tm_wday;
>> + case TM_ABS_ISDST: return tm->tm_isdst;
>> + default:
>> + assert (false);
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Modify hour according to am/pm setting. */
>> +static int
>> +fixup_ampm (struct state *state)
>> +{
>> + int hour, hdiff = 0;
>> +
>> + if (!is_field_set (state, TM_AMPM))
>> + return 0;
>> +
>> + if (!is_field_set (state, TM_ABS_HOUR))
>> + return -PARSE_TIME_ERR_TIMEFORMAT;
>> +
>> + hour = get_field (state, TM_ABS_HOUR);
>> + if (!is_valid_12hour (hour))
>> + return -PARSE_TIME_ERR_INVALIDTIME;
>> +
>> + if (get_field (state, TM_AMPM)) {
>> + /* 12pm is noon. */
>> + if (hour != 12)
>> + hdiff = 12;
>> + } else {
>> + /* 12am is midnight, beginning of day. */
>> + if (hour == 12)
>> + hdiff = -12;
>> + }
>> +
>> + mod_field (state, TM_REL_HOUR, -hdiff);
>> +
>> + return 0;
>> +}
>> +
>> +/* Combine absolute and relative fields, and round. */
>> +static int
>> +create_output (struct state *state, time_t *t_out, const time_t *ref,
>> + int round)
>> +{
>> + struct tm tm = { .tm_isdst = -1 };
>> + struct tm now;
>> + time_t t;
>> + enum field f;
>> + int r;
>> + int week_round = PARSE_TIME_NO_ROUND;
>> +
>> + r = initialize_now (state, &now, ref);
>> + if (r)
>> + return r;
>> +
>> + /* Initialize fields flagged as "now" to reference time. */
>> + for (f = TM_ABS_SEC; f != TM_NONE; f = next_abs_field (f)) {
>> + if (state->set[f] == FIELD_NOW) {
>> + state->tm[f] = tm_get_field (&now, f);
>> + state->set[f] = FIELD_SET;
>> + }
>> + }
>> +
>> + /*
>> + * If WDAY is set but MDAY is not, we consider WDAY relative
>> + *
>> + * XXX: This fails on stuff like "two months monday" because two
>> + * months ago wasn't the same day as today. Postpone until we know
>> + * date?
>> + */
>> + if (is_field_set (state, TM_ABS_WDAY) &&
>> + !is_field_set (state, TM_ABS_MDAY)) {
>> + int wday = get_field (state, TM_ABS_WDAY);
>> + int today = tm_get_field (&now, TM_ABS_WDAY);
>> + int rel_days;
>> +
>> + if (today > wday)
>> + rel_days = today - wday;
>> + else
>> + rel_days = today + 7 - wday;
>> +
>> + /* This also prevents special week rounding from happening. */
>> + mod_field (state, TM_REL_DAY, rel_days);
>> +
>> + unset_field (state, TM_ABS_WDAY);
>> + }
>> +
>> + r = fixup_ampm (state);
>> + if (r)
>> + return r;
>> +
>> + /*
>> + * Iterate fields from most accurate to least accurate, and set
>> + * unset fields according to requested rounding.
>> + */
>> + for (f = TM_ABS_SEC; f != TM_NONE; f = next_abs_field (f)) {
>> + if (round != PARSE_TIME_NO_ROUND) {
>> + enum field r = abs_to_rel_field (f);
>> +
>> + if (is_field_set (state, f) || is_field_set (state, r)) {
>> + if (round >= PARSE_TIME_ROUND_UP && f != TM_ABS_SEC) {
>> + mod_field (state, r, -1);
>
> Crazy. This could use a comment. It took me a while to figure out
> why this was -1, though maybe that's just because it's late.
Will do.
/* You're not expected to understand this */ ;)
>> + if (round == PARSE_TIME_ROUND_UP_INCLUSIVE)
>> + mod_field (state, TM_REL_SEC, 1);
>> + }
>> + round = PARSE_TIME_NO_ROUND; /* No more rounding. */
>> + } else {
>> + if (f == TM_ABS_MDAY &&
>> + is_field_set (state, TM_REL_WEEK)) {
>> + /* Week is most accurate. */
>> + week_round = round;
>> + round = PARSE_TIME_NO_ROUND;
>> + } else {
>> + set_field (state, f, field_epoch (f));
>> + }
>> + }
>> + }
>> +
>> + if (!is_field_set (state, f))
>> + set_field (state, f, tm_get_field (&now, f));
>> + }
>> +
>> + /* Special case: rounding with week accuracy. */
>> + if (week_round != PARSE_TIME_NO_ROUND) {
>> + /* Temporarily set more accurate fields to now. */
>> + set_field (state, TM_ABS_SEC, tm_get_field (&now, TM_ABS_SEC));
>> + set_field (state, TM_ABS_MIN, tm_get_field (&now, TM_ABS_MIN));
>> + set_field (state, TM_ABS_HOUR, tm_get_field (&now, TM_ABS_HOUR));
>> + set_field (state, TM_ABS_MDAY, tm_get_field (&now, TM_ABS_MDAY));
>> + }
>> +
>> + /*
>> + * Set all fields. They may contain out of range values before
>> + * normalization by mktime(3).
>> + */
>> + tm.tm_sec = get_field (state, TM_ABS_SEC) - get_field (state, TM_REL_SEC);
>> + tm.tm_min = get_field (state, TM_ABS_MIN) - get_field (state, TM_REL_MIN);
>> + tm.tm_hour = get_field (state, TM_ABS_HOUR) - get_field (state, TM_REL_HOUR);
>> + tm.tm_mday = get_field (state, TM_ABS_MDAY) -
>> + get_field (state, TM_REL_DAY) - 7 * get_field (state, TM_REL_WEEK);
>> + tm.tm_mon = get_field (state, TM_ABS_MON) - get_field (state, TM_REL_MON);
>> + tm.tm_mon--; /* 1- to 0-based */
>> + tm.tm_year = get_field (state, TM_ABS_YEAR) - get_field (state, TM_REL_YEAR) - 1900;
>> +
>> + /*
>> + * It's always normal time.
>> + *
>> + * XXX: This is probably not a solution that universally
>> + * works. Just make sure DST is not taken into account. We don't
>> + * want rounding to be affected by DST.
>> + */
>> + tm.tm_isdst = -1;
>> +
>> + /* Special case: rounding with week accuracy. */
>> + if (week_round != PARSE_TIME_NO_ROUND) {
>> + /* Normalize to get proper tm.wday. */
>> + r = normalize_tm (&tm);
>> + if (r < 0)
>> + return r;
>> +
>> + /* Set more accurate fields back to zero. */
>> + tm.tm_sec = 0;
>> + tm.tm_min = 0;
>> + tm.tm_hour = 0;
>> + tm.tm_isdst = -1;
>> +
>> + /* Monday is the true 1st day of week, but this is easier. */
>> + if (week_round >= PARSE_TIME_ROUND_UP) {
>> + tm.tm_mday += 7 - tm.tm_wday;
>> + if (week_round == PARSE_TIME_ROUND_UP_INCLUSIVE)
>> + tm.tm_sec--;
>> + } else {
>> + tm.tm_mday -= tm.tm_wday;
>> + }
>> + }
>> +
>> + if (is_field_set (state, TM_TZ)) {
>> + /* tm is in specified TZ, convert to UTC for timegm(3). */
>> + tm.tm_min -= get_field (state, TM_TZ);
>> + t = timegm (&tm);
>> + } else {
>> + /* tm is in local time. */
>> + t = mktime (&tm);
>> + }
>> +
>> + if (t == (time_t) -1)
>> + return -PARSE_TIME_ERR_LIB;
>> +
>> + *t_out = t;
>> +
>> + return 0;
>> +}
>> +
>> +/* Internally, all errors are < 0. parse_time_string() returns errors > 0. */
>> +#define EXTERNAL_ERR(r) (-r)
>> +
>> +int
>> +parse_time_string (const char *s, time_t *t, const time_t *ref, int round)
>> +{
>> + struct state state = { .last_field = TM_NONE };
>> + int r;
>> +
>> + if (!s || !t)
>> + return EXTERNAL_ERR (-PARSE_TIME_ERR);
>> +
>> + r = parse_input (&state, s);
>> + if (r < 0)
>> + return EXTERNAL_ERR (r);
>> +
>> + r = create_output (&state, t, ref, round);
>> + if (r < 0)
>> + return EXTERNAL_ERR (r);
>> +
>> + return 0;
>> +}
>> diff --git a/parse-time-string/parse-time-string.h b/parse-time-string/parse-time-string.h
>> new file mode 100644
>> index 0000000..bfa4ee3
>> --- /dev/null
>> +++ b/parse-time-string/parse-time-string.h
>> @@ -0,0 +1,102 @@
>> +/*
>> + * parse time string - user friendly date and time parser
>> + * Copyright © 2012 Jani Nikula
>> + *
>> + * This program is free software: you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation, either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + *
>> + * Author: Jani Nikula <jani at nikula.org>
>> + */
>> +
>> +#ifndef PARSE_TIME_STRING_H
>> +#define PARSE_TIME_STRING_H
>> +
>> +#ifdef __cplusplus
>> +extern "C" {
>> +#endif
>> +
>> +#include <time.h>
>> +
>> +/* return values for parse_time_string() */
>> +enum {
>> + PARSE_TIME_OK = 0,
>> + PARSE_TIME_ERR, /* unspecified error */
>> + PARSE_TIME_ERR_LIB, /* library call failed */
>> + PARSE_TIME_ERR_ALREADYSET, /* attempt to set unit twice */
>> + PARSE_TIME_ERR_FORMAT, /* generic date/time format error */
>> + PARSE_TIME_ERR_DATEFORMAT, /* date format error */
>> + PARSE_TIME_ERR_TIMEFORMAT, /* time format error */
>> + PARSE_TIME_ERR_INVALIDDATE, /* date value error */
>> + PARSE_TIME_ERR_INVALIDTIME, /* time value error */
>> + PARSE_TIME_ERR_KEYWORD, /* unknown keyword */
>> +};
>> +
>> +/* round values for parse_time_string() */
>> +enum {
>> + PARSE_TIME_ROUND_DOWN = -1,
>> + PARSE_TIME_NO_ROUND = 0,
>> + PARSE_TIME_ROUND_UP = 1,
>> + PARSE_TIME_ROUND_UP_INCLUSIVE = 2,
>> +};
>> +
>> +/**
>> + * parse_time_string() - user friendly date and time parser
>> + * @s: string to parse
>> + * @t: pointer to time_t to store parsed time in
>> + * @ref: pointer to time_t containing reference date/time, or NULL
>> + * @round: PARSE_TIME_NO_ROUND, PARSE_TIME_ROUND_DOWN, or
>> + * PARSE_TIME_ROUND_UP
>> + *
>> + * Parse a date/time string 's' and store the parsed date/time result
>> + * in 't'.
>> + *
>> + * A reference date/time is used for determining the "date/time units"
>> + * (roughly equivalent to struct tm members) not specified by 's'. If
>> + * 'ref' is non-NULL, it must contain a pointer to a time_t to be used
>> + * as reference date/time. Otherwise, the current time is used.
>> + *
>> + * If 's' does not specify a full date/time, the 'round' parameter
>> + * specifies if and how the result should be rounded as follows:
>> + *
>> + * PARSE_TIME_NO_ROUND: All date/time units that are not specified
>> + * by 's' are set to the corresponding unit derived from the
>> + * reference date/time.
>> + *
>> + * PARSE_TIME_ROUND_DOWN: All date/time units that are more accurate
>> + * than the most accurate unit specified by 's' are set to the
>> + * smallest valid value for that unit. Rest of the unspecified units
>> + * are set as in PARSE_TIME_NO_ROUND.
>> + *
>> + * PARSE_TIME_ROUND_UP: All date/time units that are more accurate
>> + * than the most accurate unit specified by 's' are set to the
>> + * smallest valid value for that unit. The most accurate unit
>> + * specified by 's' is incremented by one (and this is rolled over
>> + * to the less accurate units as necessary), unless the most
>> + * accurate unit is seconds. Rest of the unspecified units are set
>> + * as in PARSE_TIME_NO_ROUND.
>> + *
>> + * PARSE_TIME_ROUND_UP_INCLUSIVE: Same as PARSE_TIME_ROUND_UP, minus
>> + * one second, unless the most accurate unit specified by 's' is
>> + * seconds. This is useful for callers that require a value for
>> + * inclusive comparison of the result.
>> + *
>> + * Return 0 (PARSE_TIME_OK) for succesfully parsed date/time, or one
>> + * of PARSE_TIME_ERR_* on error. 't' is not modified on error.
>> + */
>> +int parse_time_string (const char *s, time_t *t, const time_t *ref, int round);
>> +
>> +#ifdef __cplusplus
>> +}
>> +#endif
>> +
>> +#endif /* PARSE_TIME_STRING_H */
>
> Made it!
Thanks for your very helpful and constructive review, as always!
BR,
Jani.
More information about the notmuch
mailing list