[PATCH 1/2] NEWS: markup changes to make mdwn->html look slightly better
Tomi Ollila
tomi.ollila at iki.fi
Wed Feb 1 07:22:49 PST 2012
Some formatting in NEWS file has been changed so that it could
be given to markdown processing almost verbatim.
More effort has been put into formatting of version 0.11 (and 0.12)
of notmuch NEWS than previous versions but everything is in better
shape that those used to be.
---
See http://notmuchmail.org/news/ (as of 2012-02-01) to see current
output (newssplit.pl -generated)
NEWS | 509 ++++++++++++++++++++++++++++++++++++------------------------------
1 files changed, 280 insertions(+), 229 deletions(-)
diff --git a/NEWS b/NEWS
index 2acdce5..1e23ec7 100644
--- a/NEWS
+++ b/NEWS
@@ -4,35 +4,35 @@ Notmuch 0.12 (2012-xx-xx)
Command-Line Interface
----------------------
-Reply to sender
+* Reply to sender
- "notmuch reply" has gained the ability to create a reply template
+ `notmuch reply` has gained the ability to create a reply template
for replying just to the sender of the message, in addition to reply
to all. The feature is available through the new command line option
- --reply-to=(all|sender).
+ `--reply-to=(all|sender)`.
-Tag exclusion
+* Tag exclusion
Tags can be automatically excluded from search results by adding them
- to the new 'search.exclude_tags' option in the Notmuch config file.
+ to the new `search.exclude_tags` option in the Notmuch config file.
This behaviour can be overridden by explicitly including an excluded
tag in your query, for example:
- notmuch search $your_query and tag:$excluded_tag
+ notmuch search $your_query and tag:$excluded_tag
- Existing users will probably want to run "notmuch setup" again to add
+ Existing users will probably want to run `notmuch setup` again to add
the new well-commented [search] section to the configuration file.
For new configurations, accepting the default setting will cause the
tags "deleted" and "spam" to be excluded, equivalent to running:
- notmuch config set search.exclude_tags deleted spam
+ notmuch config set search.exclude_tags deleted spam
Emacs Interface
---------------
-Reply to sender
+* Reply to sender
The Emacs interface has, with the new CLI support, gained the
ability to reply to sender in addition to reply to all. In both show
@@ -42,15 +42,15 @@ Reply to sender
Library changes
---------------
-New functions
+* New functions
- notmuch_query_add_tag_exclude supports the new tag exclusion
+ `notmuch_query_add_tag_exclude` supports the new tag exclusion
feature.
Build fixes
-----------
-Compatibility with GMime 2.6
+* Compatibility with GMime 2.6
It is now possible to build notmuch against both GMime 2.4 and 2.6.
However, a bug in current GMime 2.6 causes notmuch not to report
@@ -62,38 +62,38 @@ Notmuch 0.11 (2012-01-13)
Command-Line Interface
----------------------
-Hooks
+* Hooks
Hooks have been introduced to notmuch. Hooks are scripts that notmuch
- invokes before and after certain actions. Initially, "notmuch new"
- supports "pre-new" and "post-new" hooks that are run before and after
+ invokes before and after certain actions. Initially, `notmuch new`
+ supports `pre-new` and `post-new` hooks that are run before and after
importing new messages into the database.
-notmuch reply --decrypt bugfix
+* `notmuch reply --decrypt bugfix`
- The "notmuch reply" command with --decrypt argument had a rarely
+ The `notmuch reply` command with `--decrypt` argument had a rarely
occurring bug that caused an encrypted message not to be decrypted
sometimes. This is now fixed.
Performance
-----------
-Automatic tag query optimization
+* Automatic tag query optimization
- "notmuch tag" now automatically optimizes the user's query to
+ `notmuch tag` now automatically optimizes the user's query to
exclude messages whose tags won't change. In the past, we've
suggested that people do this by hand; this is no longer necessary.
-Don't sort messages when creating a dump file
+* Don't sort messages when creating a dump file
This speeds up tag dumps considerably, without any loss of
information. To replicate the old behavior of sorted output (for
- example to compare two dump files), one can use e.g. sort(1).
+ example to compare two dump files), one can use e.g. `sort(1)`.
Memory Management
-----------------
-Reduction of memory leaks
+* Reduction of memory leaks
Two memory leaks when searching and showing messages were identified
and fixed in this release.
@@ -101,63 +101,63 @@ Reduction of memory leaks
Emacs Interface
---------------
-Bug fixes
+* Bug fixes
notmuch-show-advance (bound to the spacebar in notmuch-show-mode) had
a bug that caused it to always jump to the next message, even if it
should have scrolled down to show more of the current message instead.
This is now fixed.
-Support "notmuch new" as a notmuch-poll-script
+* Support `notmuch new` as a notmuch-poll-script
- It's now possible to use "notmuch new" as a notmuch-poll-script
+ It's now possible to use `notmuch new` as a notmuch-poll-script
directly. This is also the new default. This allows taking better
- advantage of the "notmuch new" hooks from emacs without intermediate
+ advantage of the `notmuch new` hooks from emacs without intermediate
scripts.
-Improvements in saved search management
+* Improvements in saved search management
New saved searches are now appended to the list of saved searches,
not inserted in front. It's also possible to define a sort function
for displaying saved searches; alphabetical sort is provided.
-Hooks for notmuch-hello
+* Hooks for notmuch-hello
Two new hooks have been added: "notmuch-hello-mode-hook" (called after
entering notmuch-hello-mode) and "notmuch-hello-refresh-hook" (called
after updating a notmuch-hello buffer).
-New face for crypto parts headers
+* New face for crypto parts headers
Crypto parts used to be displayed with a hardcoded color. A new face
has been introduced to fix this: notmuch-crypto-part-header. It
defaults to the same value as before, but can be customized to match
other color themes.
-Use space as default thousands separator
+* Use space as default thousands separator
Large numbers in notmuch-hello are now displayed using a space as
thousands separator (e.g. "123 456" instead of "123,456"). This can be
changed by customizing "notmuch-hello-thousands-separator".
-Call notmuch-show instead of notmuch-search when clicking on
-buttonized id: links.
+* Call notmuch-show instead of notmuch-search when clicking on
+ buttonized id: links.
-New function notmuch-show-advance
+* New function notmuch-show-advance
This new function advances through just the current thread, and is
less invasive than notmuch-show-advance-and-archive. It can easily
be bound to SPC with:
- (define-key notmuch-show-mode-map " " 'notmuch-show-advance)
+ (define-key notmuch-show-mode-map " " 'notmuch-show-advance)
-Various performance improvements.
+* Various performance improvements
New add-on tool
---------------
-The tool contrib/notmuch-deliver helps with initial delivery and
-tagging of mail (replacing running notmuch new).
+The tool `contrib/notmuch-deliver` helps with initial delivery and
+tagging of mail (replacing running `notmuch new`).
Notmuch 0.10.2 (2011-12-04)
@@ -166,9 +166,9 @@ Notmuch 0.10.2 (2011-12-04)
Bug-fix release.
----------------
-Fix crash in python bindings.
+* Fix crash in python bindings
- The python bindings did not call g_type_init, which caused crashes
+ The python bindings did not call `g_type_init`, which caused crashes
for some, but not all users.
Notmuch 0.10.1 (2011-11-25)
@@ -177,7 +177,7 @@ Notmuch 0.10.1 (2011-11-25)
Bug-fix release.
----------------
-Fix --help argument
+* Fix --help argument
Argument processing changes in 0.10 introduced a bug where "notmuch
--help" crashed while "notmuch help" worked fine. This is fixed in
@@ -198,24 +198,24 @@ Full test coverage of the stashing feature in Emacs.
New command-line features
-------------------------
-Add "notmuch restore --accumulate" option
+* Add "notmuch restore --accumulate" option
The --accumulate switch causes the union of the existing and new tags to be
applied, instead of replacing each message's tags as they are read in from
the dump file.
-Add search terms to "notmuch dump"
+* Add search terms to "notmuch dump"
The dump command now takes an optional search term much like notmuch
search/show/tag. The output file argument of dump is deprecated in
favour of using stdout.
-Add "notmuch search" --offset and --limit options
+* Add "notmuch search" --offset and --limit options
The search command now takes options --offset=[-]N and --limit=N to limit
the number of results shown.
-Add "notmuch count --output" option
+* Add "notmuch count --output" option
The count command is now capable of counting threads in addition to
messages. This is selected using the new --output=(threads|messages) option.
@@ -223,21 +223,21 @@ Add "notmuch count --output" option
New emacs UI features
---------------------
-Add tab-completion for notmuch-search and notmuch-search-filter
+* Add tab-completion for notmuch-search and notmuch-search-filter
These functions now support completion tags for query parts
starting with "tag:".
-Turn "id:MSG-ID" links into buttons associated with notmuch searches
+* Turn "id:MSG-ID" links into buttons associated with notmuch searches
Text of the form "id:MSG-ID" in mails is now a clickable button that
opens a notmuch search for the given message id.
-Add keybinding ('c I') for stashing Message-ID's without an id: prefix
+* Add keybinding ('c I') for stashing Message-ID's without an id: prefix
Reduces manual labour when stashing them for use outside notmuch.
-Do not query on notmuch-search exit
+* Do not query on notmuch-search exit
It is harmless to kill the external notmuch process, so the user
is no longer interrogated when they interrupt a search.
@@ -245,9 +245,9 @@ Do not query on notmuch-search exit
Performance
-----------
-Emacs now constructs large search buffers more efficiently
+* Emacs now constructs large search buffers more efficiently
-Search avoids opening and parsing message files
+* Search avoids opening and parsing message files
We now store more information in the database so search no longer
has to open every message file to get basic headers. This can
@@ -267,7 +267,7 @@ tools are not part of notmuch, and you should check their individual
licenses. Feel free to report problems with them to the notmuch
mailing list.
-nmbug - share tags with a given prefix
+* nmbug - share tags with a given prefix
nmbug helps maintain a git repo containing all tags with a given
prefix (by default "notmuch::"). Tags can be shared by commiting
@@ -279,7 +279,7 @@ Notmuch 0.9 (2011-10-01)
New, general features
---------------------
-Correct handling of interruptions during "notmuch new"
+* Correct handling of interruptions during "notmuch new"
"notmuch new" now operates as a series of small, self-consistent
transactions, so it can correctly resume after an interruption or
@@ -290,16 +290,16 @@ Correct handling of interruptions during "notmuch new"
Library changes
---------------
-New functions
+* New functions
- notmuch_database_begin_atomic and notmuch_database_end_atomic allow
- multiple database operations to be performed atomically.
+ `notmuch_database_begin_atomic` and `notmuch_database_end_atomic`
+ allow multiple database operations to be performed atomically.
- notmuch_database_find_message_by_filename does exactly what it says.
+ `notmuch_database_find_message_by_filename` does exactly what it says.
-API changes
+* API changes
- notmuch_database_find_message (and n_d_f_m_by_filename) now return
+ `notmuch_database_find_message` (and `n_d_f_m_by_filename`) now return
a status indicator and uses an output parameter for the
message. This change required changing the SONAME of libnotmuch to
libnotmuch.so.2
@@ -309,8 +309,8 @@ Python bindings changes
- Re-encode python unicode objects to utf-8 before passing back to
libnotmuch.
- - Support Database().begin_atomic()/end_atomic()
- - Support Database().find_message_by_filename()
+ - Support `Database().begin_atomic()/end_atomic()`
+ - Support `Database().find_message_by_filename()`
NB! This needs a db opened in READ-WRITE mode currently, or it will crash
the python process. The is a limitation (=bug) of the underlying libnotmuch.
- Fixes where we would not throw NotmuchErrors when we should (Justus Winter)
@@ -319,17 +319,17 @@ Python bindings changes
Ruby bindings changes
---------------------
- - Wrap new library functions notmuch_database_{begin,end}_atomic.
- - Add new exception Notmuch::UnbalancedAtomicError.
+ - Wrap new library functions `notmuch_database_{begin,end}_atomic.`
+ - Add new exception `Notmuch::UnbalancedAtomicError.`
- Rename destroy to destroy! according to Ruby naming conventions.
- - Update for n_d_find_message* API changes (see above).
+ - Update for `n_d_find_message*` API changes (see above).
Emacs improvements
------------------
* Add gpg callback to crypto sigstatus buttons to retrieve/refresh
signing key.
- * Add notmuch-show-refresh-view function (and corresponding binding)
+ * Add `notmuch-show-refresh-view` function (and corresponding binding)
to refresh the view of a notmuch-show buffer.
Reply formatting cleanup
@@ -341,7 +341,7 @@ Reply formatting cleanup
Notmuch 0.8 (2011-09-10)
========================
-Improved handling of message/rfc822 parts
+* Improved handling of message/rfc822 parts
Both in the CLI and the emacs interface. Output of rfc822 parts now
includes the primary headers, as well as the body and all subparts.
@@ -349,20 +349,20 @@ Improved handling of message/rfc822 parts
headers, is unfortunately not yet supported (but hopefully will be
soon).
-Improved Build system portability
+* Improved Build system portability
Certain parts of the shell script generating notmuch.sym were
specific to the GNU versions of sed and nm. The new version should
be more portable to e.g. OpenBSD.
-Documentation update for Ruby bindings
+* Documentation update for Ruby bindings
Added documentation, typo fixes, and improved support for rdoc.
-Unicode, iterator, PEP8 changes for python bindings
+* Unicode, iterator, PEP8 changes for python bindings
- PEP8 (code formatting) changes for python files.
- - Remove Tags.__len__ ; see 0.6 release notes for motivation.
+ - Remove `Tags.__len__` ; see 0.6 release notes for motivation.
- Decode headers as UTF8, encode (unicode) database paths as UTF8.
Notmuch 0.7 (2011-08-01)
@@ -393,9 +393,9 @@ Sebastian Spaeth contributed two changes related to unicode and UTF8:
* query string is encoded as a UTF8 byte string
Build-System improvements
-------------------------
+-------------------------
-Generate notmuch.sym after the relevant object files
+* Generate notmuch.sym after the relevant object files
This fixes a bug in parallel building. Thanks to Thomas Jost for the
patch.
@@ -403,19 +403,21 @@ Generate notmuch.sym after the relevant object files
Notmuch 0.6.1 (2011-07-17)
==========================
-Bug-fix release.
-----------------
+Bug-fix release
+---------------
-Re-export Xapian exception typeinfo symbols.
+* Re-export Xapian exception typeinfo symbols
It turned out our aggressive symbol hiding caused problems for
people running gcc 4.4.5.
Notmuch 0.6 (2011-07-01)
=======================
+
New, general features
---------------------
-Folder-based searching
+
+* Folder-based searching
Notmuch queries can now include a search term to match the
directories in which mail files are stored (within the mail
@@ -447,13 +449,13 @@ Folder-based searching
notmuch new
notmuch restore notmuch.dump
-Support for PGP/MIME
+* Support for PGP/MIME
- Both the command line interface and the emacs-interface have new
+ Both the command-line interface and the emacs-interface have new
support for PGP/MIME, detailed below. Thanks to Daniel Kahn Gillmor
and Jameson Graef Rollins for making this happen.
-New, automatic tags: "signed" and "encrypted"
+* New, automatic tags: "signed" and "encrypted"
These tags will automatically be applied to messages containing
multipart/signed and multipart/encrypted parts.
@@ -463,25 +465,26 @@ New, automatic tags: "signed" and "encrypted"
New command-line features
-------------------------
-Add new "notmuch show --verify" option for signature verification
+
+* Add new "notmuch show --verify" option for signature verification
This option instruct notmuch to verify the signature of
PGP/MIME-signed parts.
-Add new "notmuch show --decrypt" and "notmuch reply --decrypt" options
+* Add new "notmuch show --decrypt" and "notmuch reply --decrypt" options
This option instructs notmuch to decrypt PGP/MIME-encrypted parts.
Note that this feature currently requires gpg-agent and a passphrase entry
tool (e.g. pinentry-gtk or pinentry-curses).
-Proper nesting of multipart parts in "notmuch show" output
+* Proper nesting of multipart parts in "notmuch show" output
MIME parts are now display with proper nesting to reflect original
MIME hierarchy of a message. This allows clients to correctly
analyze the MIME structure, (such as, for example, determining to
which parts a signature part applies).
-Add new "notmuch show --part" option
+* Add new "notmuch show --part" option
This is a replacement for the older "notmuch part" command, (which
is now deprecated—it should still work as always, but is no longer
@@ -490,7 +493,7 @@ Add new "notmuch show --part" option
part, (such as --format=json for extracting a message part with JSON
formatting).
-Deprecate "notmuch search-tags", (in favor of "notmuch search --output=tags *")
+* Deprecate "notmuch search-tags" (in favor of "notmuch search --output=tags *")
The "notmuch search-tags" sub-command has been redundant since the
addition of the --output=tags option to "notmuch search". We now
@@ -500,7 +503,8 @@ Deprecate "notmuch search-tags", (in favor of "notmuch search --output=tags *")
Performance improvements
------------------------
-Faster searches (by doing fewer searches to construct threads)
+
+* Faster searches (by doing fewer searches to construct threads)
Whenever a user asks for search results as threads, notmuch first
performs a search for messages matching the query, then performs
@@ -509,7 +513,7 @@ Faster searches (by doing fewer searches to construct threads)
Removing inefficiencies and redundancies in these secondary searches
results in a measured speedups of 1.5x for a typical search.
-Faster searches (by doing fewer passes to gather message data)
+* Faster searches (by doing fewer passes to gather message data)
Optimizing Xapian data access patterns (using a single pass to get
all message-document data rather than a pass for each data type)
@@ -520,13 +524,13 @@ Faster searches (by doing fewer passes to gather message data)
of 2.5x for a search of all messages in his inbox (was 4.5s, now
1.8s). Thanks, Austin!
-Faster initial indexing
+* Faster initial indexing
More efficient indexing of new messages results in a measured
speedup of 1.4x for the initial indexing of 3 GB of mail (1h 14m
rather than 1h 46m). Thanks to Austin Clements and Michal Sojka.
-Make "notmuch new" faster for unchanged directories
+* Make "notmuch new" faster for unchanged directories
Optimizing to not do any further examinations of sub-directories
when the filesystem indicates that a directory is unchanged from the
@@ -536,23 +540,23 @@ Make "notmuch new" faster for unchanged directories
New emacs-interface features
----------------------------
-Support for PGP/MIME (GnuPG)
+* Support for PGP/MIME (GnuPG)
Automatically indicate validity of signatures for multipart/signed
messages. Automatically display decrypted content for
multipart/encrypted messages. See the emacs variable
notmuch-crypto-process-mime for more information. Note that this
- needs gpg-agent and a pinentry tool just as the command line tools.
+ needs gpg-agent and a pinentry tool just as the command-line tools.
Also note there is no support SMIME yet.
-Output of pipe command is now displayed if pipe command fails
+* Output of pipe command is now displayed if pipe command fails
This is extremely useful in the common use case of piping a patch to
"git am". If git fails to cleanly merge the patch the error messages
from the failed merge are now clearly displayed to the user, (where
previously they were silently hidden from the user).
-User-selectable From address
+* User-selectable From address
A user can choose which configured email addresses should be used as
the From address whenever composing a new message. To do so, simply
@@ -568,12 +572,13 @@ User-selectable From address
the "Notmuch Always Prompt For Sender" option in the notmuch
customize group.
-Hiding of repeated subjects in collapsed thread view
+* Hiding of repeated subjects in collapsed thread view
In notmuch-show mode, if a collapsed message has the same subject as
its parent, the subject is not shown.
-Automatic detection and hiding of original message in top-posted message
+* Automatic detection and hiding of original message in top-posted
+ message
When a message contains a line looking something like:
@@ -584,7 +589,7 @@ Automatic detection and hiding of original message in top-posted message
button to display it again). This makes the handling of top-posted
citations work much like conventional citations.
-New hooks for running code when tags are modified
+* New hooks for running code when tags are modified
Some users want to perform additional actions whenever a particular
tag is added/removed from a message. This could be used to, for
@@ -595,7 +600,7 @@ New hooks for running code when tags are modified
Notmuch Before Tag Hook
Notmuch After Tag Hook
-New optional support for hiding some multipart/alternative parts
+* New optional support for hiding some multipart/alternative parts
Many emails are sent with redundant content within a
multipart/alternative group (such as a text/plain part as well as a
@@ -609,12 +614,13 @@ New optional support for hiding some multipart/alternative parts
because there's not yet a simple way to re-display such a hidden
part if it is not actually redundant with a displayed part.
-Better rendering of text/x-vcalendar parts
+* Better rendering of text/x-vcalendar parts
These parts are now displayed in a format suitable for use with the
emacs diary.
-Avoid getting confused by Subject and Author fields with newline characters
+* Avoid getting confused by Subject and Author fields with newline
+ characters
Replacing all characters with ASCII code less than 32 with a question mark.
@@ -623,6 +629,7 @@ and drop "name" if it's actually just a repeat of the email address).
Vim interface improvements
--------------------------
+
Felipe Contreras provided a number of updates for the vim interface:
* Using sendmail directly rather than mailx,
@@ -633,39 +640,43 @@ Felipe Contreras provided a number of updates for the vim interface:
Bindings improvements
---------------------
-Ruby bindings are now much more complete
- Including QUERY.sort, QUERY.to_s, MESSAGE.maildir_flags_to_tags,
- MESSAGE.tags_to_maildir_flags, and MESSAGE.get_filenames
+* Ruby bindings are now much more complete
+
+ Including `QUERY.sort`, `QUERY.to_s`, `MESSAGE.maildir_flags_to_tags`,
+ `MESSAGE.tags_to_maildir_flags`, and `MESSAGE.get_filenames`
* Python bindings have been updated and extended
+
(docs online at http://packages.python.org/notmuch/)
New bindings:
- - Message().get_filenames(),
- - Message().tags_to_maildir_flags(),Message().maildir_flags_to_tags()
- - list(Threads()) and list(Messages) works now
+ - `Message().get_filenames()`,
+ - `Message().tags_to_maildir_flags()`, `Message().maildir_flags_to_tags()`
+ - `list(Threads())` and `list(Messages)` works now
- - Message().__cmp__() and __hash__()
- These allow, for example:
+ - `Message().__cmp__() and __hash__()`
+ These allow, for example:
if msg1 == msg2: ...
- As well as set arithmetic on Messages():
+ As well as set arithmetic on `Messages()`:
s1, s2= set(msgs1), set(msgs2)
s1.union(s2)
s2 -= s1
Removed:
- - len(Messages()) as it exhausted the iterator.
- Use len(list(Messages())) or
- Query.count_messages() to get the length.
+ - len(Messages()) as it exhausted the iterator.
+ Use len(list(Messages())) or
+ `Query.count_messages()` to get the length.
-Added initial Go bindings in bindings/go
+* Added initial Go bindings in bindings/go
New build-system features
-------------------------
-Added support for building in a directory other than the source directory
+
+* Added support for building in a directory other than the source
+ directory
This can be used with the widely-supported idiom of simply running
the configure script from some other directory:
@@ -675,7 +686,7 @@ Added support for building in a directory other than the source directory
../configure
make
-Fix to save configure options for future, implicit runs of configure
+* Fix to save configure options for future, implicit runs of configure
When a user updates the source (such as with "git pull") calling
"make" may cause an automatic re-run of the configure script. When
@@ -685,7 +696,8 @@ Fix to save configure options for future, implicit runs of configure
New test-suite feature
----------------------
-Binary for bash for running test suite now located via PATH.
+
+* Binary for bash for running test suite now located via PATH
The notmuch test suite requires a fairly recent version of bash (>=
bash 4). As some systems supply an older version of bash at
@@ -694,16 +706,16 @@ Binary for bash for running test suite now located via PATH.
simply install bash >= 4 somewhere on $PATH before /bin and then use
the test suite.
-Support for testing output with a trailing newline.
+* Support for testing output with a trailing newline
Previously, some tests would fail to notice a difference in the
presence/absence of a trailing newline in a program output, (which
has led to bugs in the past). Now, carefully-written tests (using
- test_expect_equal_file rather than test_expect_equal) will detect
+ `test_expect_equal_file` rather than `test_expect_equal`) will detect
any change in the presence/absence of a trailing newline. Many tests
are updated to take advantage of this.
-Avoiding accessing user's $HOME while running test suite
+* Avoiding accessing user's $HOME while running test suite
The test suite now carefully creates its own HOME directory. This
allows the test suite to be run with no existing HOME directory, (as
@@ -713,13 +725,14 @@ Avoiding accessing user's $HOME while running test suite
General bug fixes
-----------------
-Output *all* files for "notmuch search --output=files"
+
+* Output *all* files for "notmuch search --output=files"
For the cases where multiple files have the same Message ID,
previous versions of notmuch would output only one such file. This
command is now fixed to correctly output all files.
-Fixed spurious search results from "overlapped" indexing of addresses
+* Fixed spurious search results from "overlapped" indexing of addresses
This fixed a bug where a search for:
@@ -729,24 +742,24 @@ Fixed spurious search results from "overlapped" indexing of addresses
To: user at example,com, someone at elsewhere.com
-Fix --output=json when search has no results
+* Fix --output=json when search has no results
A bug present since notmuch 0.4 had caused searches with no results
to produce an invalid json object. This is now fixed to cleanly
return a valid json object representing an empty array "[]" as
expected.
-fix the automatic detection of the From address for "notmuch reply"
-from the Received headers in some cases.
+* Fix the automatic detection of the From address for "notmuch reply"
+ from the Received headers in some cases.
-Fix core dump on DragonFlyBSD due to -1 return value from
-sysconf(_SC_GETPW_R_SIZE_MAX).
+* Fix core dump on DragonFlyBSD due to -1 return value from
+ `sysconf(_SC_GETPW_R_SIZE_MAX)`.
-Cleaned up several memory leaks
+* Cleaned up several memory leaks
-Eliminated a few, rare segmentation faults and a double-free.
+* Eliminated a few, rare segmentation faults and a double-free
-Fix libnotmuch library to only export notmuch API functions
+* Fix libnotmuch library to only export notmuch API functions
Previous release of the notmuch library also exported some Xapian
C++ exception type symbols. These were never part of the library
@@ -754,48 +767,52 @@ Fix libnotmuch library to only export notmuch API functions
Emacs-interface bug fixes
-------------------------
-Display any unexpected output or errors from "notmuch search" invocations
+
+* Display any unexpected output or errors from "notmuch search"
+invocations
Previously any misformatted output or trailing error messages were
silently ignored. This output is now clearly displayed. This fix was
very helpful in identifying and fixing the bug described below.
-Fix bug where some threads would be missing from large search results
+* Fix bug where some threads would be missing from large search results
When a search returned a "large" number of results, the emacs
interface was incorrectly dropping one thread every time the output
of the "notmuch search" process spanned the emacs read-buffer. This
is now fixed.
-Avoid re-compression of .gz files (and similar) when saving attachment
+* Avoid re-compression of .gz files (and similar) when saving attachment
Emacs was being too clever for its own good and trying to
re-compress pre-compressed .gz files when saving such attachments
(potentially corrupting the attachment). The emacs interface is
fixed to avoid this bug.
-Fix hiding of a message when a previously-hidden citation is visible
+* Fix hiding of a message when a previously-hidden citation is visible
Previously the citation would remain visible in this case. This is
fixed so that hiding a message hides all parts.
Notmuch 0.5 (2010-11-11)
========================
+
New, general features
---------------------
-Maildir-flag synchronization
+
+* Maildir-flag synchronization
Notmuch now knows how to synchronize flags in maildir filenames with
tags in the notmuch database. The following flag/tag mappings are
supported:
- Flag <-> Tag
- ---- -----
- 'D' draft
- 'F' flagged
- 'P' passed
- 'R' replied
- 'S' unread (added when 'S' flag is not present)
+ Flag <-> Tag
+ ---- -----
+ 'D' draft
+ 'F' flagged
+ 'P' passed
+ 'R' replied
+ 'S' unread (added when 'S' flag is not present)
The synchronization occurs in both directions, (for example, adding
the 'S' flag to a file will cause the "unread" tag to be added, and
@@ -805,7 +822,7 @@ Maildir-flag synchronization
This synchronization is enabled by default for users of the
command-line interface, (though only files in directories named
"cur" or "new" will be renamed). It can be disabled by setting the
- new maildir.synchronize_flags option in the configuration file. For
+ new `maildir.synchronize_flags` option in the configuration file. For
example:
notmuch config set maildir.synchronize_flags false
@@ -826,25 +843,27 @@ Maildir-flag synchronization
New library features
--------------------
-Support for querying multiple filenames for a single message
+
+* Support for querying multiple filenames for a single message
It is common for the mailstore to contain multiple files with the
same message ID. Previously, notmuch would always hide these
duplicate files, (returning a single, arbitrary filename with
- notmuch_message_get_filename).
+ `notmuch_message_get_filename`).
With this release, library users can access all filenames for a
message with the new function:
notmuch_message_get_filenames
- Together with notmuch_filenames_valid, notmuch_filenames_get, and
- notmuch_filenames_move_to_next it is now possible to iterate over
- all available filenames for a given message.
+ Together with `notmuch_filenames_valid`, `notmuch_filenames_get`,
+ and `notmuch_filenames_move_to_next` it is now possible to iterate
+ over all available filenames for a given message.
New command-line features
-------------------------
-New "notmuch show --format=raw" for getting at original email contents
+
+* New "notmuch show --format=raw" for getting at original email contents
This new feature allows for a fully-functional email client to be
built on top of the notmuch command-line without needing any direct
@@ -863,7 +882,8 @@ New "notmuch show --format=raw" for getting at original email contents
General bug fixes
-----------------
-Fix "notmuch search" to print nothing when nothing matches
+
+* Fix "notmuch search" to print nothing when nothing matches
The 0.4 release had a bug in which:
@@ -876,17 +896,18 @@ Fix "notmuch search" to print nothing when nothing matches
Emacs interface improvements
----------------------------
-Fix to allow pipe ('|') command to work when using notmuch over ssh
-Fix count of lines in hidden signatures.
+* Fix to allow pipe ('|') command to work when using notmuch over ssh
+
+* Fix count of lines in hidden signatures
-Omit repeated subject lines in (collapsed) thread display.
+* Omit repeated subject lines in (collapsed) thread display
-Display current thread subject in a header line.
+* Display current thread subject in a header line
-Provide a "c i" binding to copy a thread ID from the search view.
+* Provide a "c i" binding to copy a thread ID from the search view
-Allow for notmuch-fcc-dirs to have a value of nil.
+* Allow for notmuch-fcc-dirs to have a value of nil
Also, the more complex form of notmuch-fcc-dirs now has a slightly
different format. It no longer has a special first-element, fallback
@@ -898,7 +919,8 @@ Allow for notmuch-fcc-dirs to have a value of nil.
Vim interface improvements
--------------------------
-Felipe Contreras provided a number of updates for the vim interface.
+
+Felipe Contreras provided a number of updates for the vim interface
These include optimizations, support for newer versions of vim, fixed
support for sending mail on modern systems, new commands, and
@@ -906,13 +928,16 @@ Felipe Contreras provided a number of updates for the vim interface.
New bindings
------------
+
Added initial ruby bindings in bindings/ruby
Notmuch 0.4 (2010-11-01)
========================
+
New command-line features
-------------------------
-notmuch search --output=(summary|threads|messages|tags|files)
+
+* `notmuch search --output=(summary|threads|messages|tags|files)`
This new option allows for particular items to be returned from
notmuch searches. The "summary" option is the default and behaves
@@ -927,7 +952,7 @@ notmuch search --output=(summary|threads|messages|tags|files)
<operations-on> "$file"
done
-notmuch show --format=mbox <search-specification>
+* `notmuch show --format=mbox <search-specification>`
This new option allows for the messages matching a search
specification to be presented as an mbox. Specifically the "mboxrd"
@@ -936,14 +961,14 @@ notmuch show --format=mbox <search-specification>
beginning of all lines beginning with one or more '>' characters
followed by the 5 characters "From ".
-notmuch config [get|set] <section>.<item> [value ...]
+* `notmuch config [get|set] <section>.<item> [value ...]`
The new top-level "config" command allows for any value in the
notmuch configuration file to be queried or set to a new value. Both
single-valued and multi-valued items are supported, as our any
custom items stored in the configuration file.
-Avoid setting Bcc header in "notmuch reply"
+* Avoid setting Bcc header in "notmuch reply"
We decided that this was a bit heavy-handed as the actual mail
user-agent should be responsible for setting any Bcc option. Also,
@@ -952,14 +977,16 @@ Avoid setting Bcc header in "notmuch reply"
New library features
--------------------
-Add notmuch_query_get_query_string and notmuch_query_get_sort
+
+* Add `notmuch_query_get_query_string` and `notmuch_query_get_sort`
These are simply functions for querying properties of a
- notmuch_query_t object.
+ `notmuch_query_t` object.
New emacs features
------------------
-Enable Fcc of all sent messages by default (to "sent" directory)
+
+* Enable Fcc of all sent messages by default (to "sent" directory)
All messages sent from the emacs interface will now be saved to the
notmuch mail store where they will be incorporated to the database
@@ -968,21 +995,21 @@ Enable Fcc of all sent messages by default (to "sent" directory)
can be customized by means of the "Notmuch Fcc Dirs" option in the
notmuch customize interface.
-Ability to all open messages in a thread to a pipe
+* Ability to all open messages in a thread to a pipe
Historically, the '|' keybinding allows for piping a single message
to an external command. Now, by prefixing this key with a prefix
argument, (for example, by pressing "Control-U |"), all open
messages in the current thread will be sent to the external command.
-Optional support for detecting inline patches
+* Optional support for detecting inline patches
This hook is disabled by default but can be enabled with a checkbox
under "Notmuch Show Insert Text/Plain Hook" in the notmuch customize
interface. It allows for inline patches to be detected and treated
as if they were attachments, (with context-sensitive highlighting).
-Automatically tag messages as "replied" when sending a reply
+* Automatically tag messages as "replied" when sending a reply
Messages replied to within the emacs interface will now be tagged as
"replied". This feature can easily be customized to add or remove
@@ -991,7 +1018,7 @@ Automatically tag messages as "replied" when sending a reply
that tag when replying. See "Notmuch Message Mark Replied" in the
notmuch customize interface.
-Allow search-result color specifications to overlay each other
+* Allow search-result color specifications to overlay each other
For example, one tag can specify the background color of matching
lines, while another can specify the foreground. With this change,
@@ -999,7 +1026,7 @@ Allow search-result color specifications to overlay each other
case in previous releases). See "Notmuch Search Line Faces" in the
notmuch customize interface.
-Make hidden author names still available for incremental search.
+* Make hidden author names still available for incremental search
When there is insufficient space to display all authors of a thread
in search results, the names of hidden authors are now still made
@@ -1007,7 +1034,7 @@ Make hidden author names still available for incremental search.
searches, matching lines will temporarily expand to show the hidden
names.
-New binding of Control-TAB (works like TAB in reverse)
+* New binding of Control-TAB (works like TAB in reverse)
Many notmuch nodes already use TAB to navigate forward through
various items allowing actions, (message headers, email attachments,
@@ -1016,13 +1043,14 @@ New binding of Control-TAB (works like TAB in reverse)
New build-system features
-------------------------
-Various portability fixes have been applied
+
+* Various portability fixes have been applied
These include fixes for build failures on at least Solaris, FreeBSD,
and Fedora systems. We're hopeful that the notmuch code base is now
more portable than ever before.
-Arrange for libnotmuch to be found automatically after make install
+* Arrange for libnotmuch to be found automatically after make install
The notmuch build system is now careful to help the user avoid
errors of the form "libnotmuch.so could not be found" immediately
@@ -1039,9 +1067,9 @@ Arrange for libnotmuch to be found automatically after make install
When this support works, the user should be able to run notmuch
immediately after "make install", without any errors trying to find
the notmuch library, and without having to manually set environment
- variables such as LD_LIBRARY_PATH.
+ variables such as `LD_LIBRARY_PATH`.
-Check compiler/linker options before using them
+* Check compiler/linker options before using them
The configure script now carefully checks that any desired
compilation options, (whether for enabling compiler warnings, or for
@@ -1050,7 +1078,8 @@ Check compiler/linker options before using them
New test-suite features
-----------------------
-New modularization of test suite.
+
+* New modularization of test suite
Thanks to a gracious relicensing of the test-suite infrastructure
from the git project, notmuch now has a modular test suite. This
@@ -1061,7 +1090,7 @@ New modularization of test suite.
it easy to run the test suite within valgrind (pass --valgrind to
notmuch-test or to any sub-script) which has been very useful.
-New testing of emacs interface.
+* New testing of emacs interface
The test suite has been augmented to allow automated testing of the
emacs interfaces. So far, this includes basic searches, display of
@@ -1072,7 +1101,8 @@ New testing of emacs interface.
General bug fixes
-----------------
-Fix potential corruption of database when "notmuch new " is interrupted.
+
+* Fix potential corruption of database when "notmuch new " is interrupted
Previously, an interruption of "notmuch new" would (rarely) result
in a corrupt database. The corruption would manifest itself by a
@@ -1083,21 +1113,22 @@ Fix potential corruption of database when "notmuch new " is interrupted.
The message-adding code has been carefully audited and reworked to
avoid this sort of corruption regardless of when it is interrupted.
-Fix failure with extremely long message ID headers.
+* Fix failure with extremely long message ID headers
Previously, a message with an extremely long message ID, (say, more
than 300 characters), would fail to be added to notmuch, (triggering
Xapian exceptions). This has now been fixed.
-Fix for messages with "charset=unknown-8bit"
+* Fix for messages with "charset=unknown-8bit"
Previously, messages with this charset would cause notmuch to emit a
GMime warning, (which would then trip up emacs or other interfaces
parsing the notmuch results).
-Fix notmuch_query_search_threads function to return NULL on any exception
+* Fix `notmuch_query_search_threads` function to return NULL on any exception
-Fix "notmuch search" to return non-zero if notmuch_query_search_threads fails
+* Fix "notmuch search" to return non-zero if `notmuch_query_search_threads`
+ fails
Previously, this command could confusingly report a Xapian
exception, yet still return an error code of 0. It now correctly
@@ -1105,7 +1136,8 @@ Fix "notmuch search" to return non-zero if notmuch_query_search_threads fails
Emacs bug fixes
---------------
-Fix to handle a message with a subject containing, for example "[1234]"
+
+* Fix to handle a message with a subject containing, for example "[1234]"
Previously, a message subject containing a sequence of digits within
square brackets would cause the emacs interface to mis-parse the
@@ -1113,7 +1145,7 @@ Fix to handle a message with a subject containing, for example "[1234]"
mis-displayed and prevent the user from manipulating the message in
the emacs interface.
-Fix to correctly handle message IDs containing ".."
+* Fix to correctly handle message IDs containing ".."
The emacs interface now properly quotes message IDs to avoid a
Xapian bug in which the ".." within a message ID would be
@@ -1121,11 +1153,13 @@ Fix to correctly handle message IDs containing ".."
Python-binding fixes
--------------------
+
The python bindings for notmuch have been updated to work with python3.
Debian-specific fixes
---------------------
-Fix emacs initialization so "M-x notmuch" works for users by default.
+
+* Fix emacs initialization so "M-x notmuch" works for users by default
Now, a new Debian user can immediately run "emacs -f notmuch" after
"apt-get install notmuch". Previously, the user would have had to
@@ -1134,16 +1168,18 @@ Fix emacs initialization so "M-x notmuch" works for users by default.
Notmuch 0.3.1 (2010-04-27)
==========================
+
General bug fixes
-----------------
-Fix an infinite loop in "notmuch reply"
+
+* Fix an infinite loop in "notmuch reply"
This bug could be triggered by replying to a message where the
user's primary email address did not appear in the To: header and
the user had not configured any secondary email addresses. The bug
was a simple re-use of the same iterator variable in nested loops.
-Fix a potential SEGV in "notmuch search"
+* Fix a potential SEGV in "notmuch search"
This bug could be triggered by an author name ending in a ','.
Admittedly - that's almost certainly a spam email, but we never
@@ -1151,6 +1187,7 @@ Fix a potential SEGV in "notmuch search"
Emacs bug fixes
---------------
+
Fix calculations for line wrapping in the primary "notmuch" view.
Fix Fcc support to prompt to create a directory if the specified Fcc
@@ -1158,34 +1195,37 @@ directory does not exist.
Build fix
---------
-Fix build on OpenSolaris (at least) due to missing 'extern "C"' block.
+
+* Fix build on OpenSolaris (at least) due to missing 'extern "C"' block
Without this, the C++ sources could not find strcasestr and the
final linking of notmuch would fail.
Notmuch 0.3 (2010-04-27)
========================
+
New command-line features
-------------------------
-User-configurable tags for new messages
+
+* User-configurable tags for new messages
A new "new.tags" option is available in the configuration file to
determine which tags are applied to new messages. Run "notmuch
setup" to generate new documentation within ~/.notmuch-config on how
to specify this value.
-Threads search results named based on subjects that match search
+* Threads search results named based on subjects that match search
This means that when new mails arrived to a thread you've previously
read, and the new mails have a new subject, you will see that
subject in the search results rather than the old subject.
-Faster operation of "notmuch tag" (avoid unneeded sorting)
+* Faster operation of "notmuch tag" (avoid unneeded sorting)
Since the user just wants to tag all matching messages, we can make
things perform a bit faster by avoiding the sort.
-Even Better guessing of From: header for "notmuch reply"
+* Even Better guessing of From: header for "notmuch reply"
Notmuch now looks at a number of headers when trying to figure out
the best From: header to use in a reply. This is helpful if you have
@@ -1194,7 +1234,7 @@ Even Better guessing of From: header for "notmuch reply"
replying to won't always include your subscribed address in the To:
header).
-Indication of author names that match a search
+* Indication of author names that match a search
When notmuch displays threads as the result of a search, it now
lists the authors that match the search before listing the other
@@ -1205,6 +1245,7 @@ Indication of author names that match a search
New: Python bindings
--------------------
+
Sebastian Spaeth has contributed his python bindings for the notmuch
library to the central repository. These bindings were previously
known as "cnotmuch" within python but have now been renamed to be
@@ -1221,7 +1262,8 @@ package-building scripts. Improvements are welcome.
Emacs interface improvements
----------------------------
-An entirely new initial view for notmuch, (friendly yet powerful)
+
+* An entirely new initial view for notmuch, (friendly yet powerful)
Some of us call the new view "notmuch hello" but you can get at it
by simply calling "emacs -f notmuch". The new view provides a search
@@ -1248,7 +1290,7 @@ An entirely new initial view for notmuch, (friendly yet powerful)
leave that off to have your search results in "newest first"
order.
-Full-featured "customize" support for configuring notmuch
+* Full-featured "customize" support for configuring notmuch
Notmuch now plugs in well to the emacs "customize" mode to make it
much simpler to find things about the notmuch interface that can be
@@ -1264,7 +1306,7 @@ Full-featured "customize" support for configuring notmuch
selectors, and text-entry boxes for configuring the various
settings.
-Support for doing tab-completion of email addresses
+* Support for doing tab-completion of email addresses
This support currently relies on an external program,
(notmuch-addresses), that is not yet shipped with notmuch
@@ -1283,14 +1325,14 @@ Support for doing tab-completion of email addresses
hitting TAB on a partial email address or name within the To: or Cc:
line of an email message will provide matching completions.
-Support for file-based (Fcc) delivery of sent messages to mail store
+* Support for file-based (Fcc) delivery of sent messages to mail store
This isn't yet enabled by default. To enable this, one will have to
set the "Notmuch Fcc Dirs" setting within the notmuch customize
screen, (see its documentation there for details). We anticipate
making this automatic in a future release.
-New 'G' key binding to trigger mail refresh (G == "Get new mail")
+* New 'G' key binding to trigger mail refresh (G == "Get new mail")
The 'G' key works wherever '=' works. Before refreshing the screen
it calls an external program that can be used to poll email servers,
@@ -1300,13 +1342,13 @@ New 'G' key binding to trigger mail refresh (G == "Get new mail")
typically invoke "notmuch new" and then perhaps several "notmuch
tag" commands.
-Implement emacs message display with the JSON output from notmuch.
+* Implement emacs message display with the JSON output from notmuch
This is much more robust than the previous implementation, (where
some HTML mails and mail quoting the notmuch code with the delimiter
characters in it would cause the parser to fall over).
-Better handling of HTML messages and MIME attachments (inline images!)
+* Better handling of HTML messages and MIME attachments (inline images!)
Allow for any MIME parts that emacs can display to be displayed
inline. This includes inline viewing of image attachments, (provided
@@ -1321,7 +1363,7 @@ Better handling of HTML messages and MIME attachments (inline images!)
saved individually (the 'w' key is still available to save all
attachments).
-Customizable support for tidying of text/plain message content
+* Customizable support for tidying of text/plain message content
Many new functions are available for tidying up message
content. These include options such as wrapping long lines,
@@ -1331,7 +1373,7 @@ Customizable support for tidying of text/plain message content
clicking the available check boxes under the "Notmuch Show Insert
Text/Plain Hook" within the notmuch customize screen.
-New support for searchable citations (even when hidden)
+* New support for searchable citations (even when hidden)
When portions of overly-long citations are hidden, the contents of
these citations will still be available for emacs' standard
@@ -1339,7 +1381,7 @@ New support for searchable citations (even when hidden)
of a hidden citation, the citation will become visible temporarily
to display the search result.
-More flexible handling of header visibility
+* More flexible handling of header visibility
As an answer to complaints from many users, the To, Cc, and Date
headers of messages are no longer hidden by default. For those users
@@ -1352,25 +1394,26 @@ More flexible handling of header visibility
new "Notmuch Message Headers" variable can be customized to list
only those headers that should be present in the display of a message.
-The Return key now toggles message visibility anywhere
+* The Return key now toggles message visibility anywhere
Previously this worked only on the first summary-line of a message.
-Customizable formatting of search results
+* Customizable formatting of search results
The user can easily customize the order, width, and formatting of
the various fields in a "notmuch search" buffer. See the "Notmuch
Search Result Format" section of the customize interface.
-Generate nicer names for search buffers when using a saved search.
+* Generate nicer names for search buffers when using a saved search
-Add a notmuch User-Agent header when sending mail from notmuch/emacs.
+* Add a notmuch User-Agent header when sending mail from notmuch/emacs
-New keybinding (M-Ret) to open all collapsed messages in a thread.
+* New keybinding (M-Ret) to open all collapsed messages in a thread
New library feature
-------------------
-Provide a new NOTMUCH_SORT_UNSORTED value for queries
+
+* Provide a new `NOTMUCH_SORT_UNSORTED` value for queries
This can be somewhat faster when sorting simply isn't desired. For
example when collecting a set of messages that will all be
@@ -1380,27 +1423,30 @@ Provide a new NOTMUCH_SORT_UNSORTED value for queries
Build fixes
-----------
-Fix to compile against GMime 2.6
+
+* Fix to compile against GMime 2.6
Previously notmuch insisted on being able to find GMime 2.4, (even
though GMime 2.6 would have worked all along).
-Fix configure script to accept (and ignore) various standard options.
+* Fix configure script to accept (and ignore) various standard options
For example, those that the Gentoo build scripts expect configure to
accept are now all accepted.
Test suite
----------
-A large number of new tests for the many new features.
-Better display of output from failed tests.
+* A large number of new tests for the many new features
+
+* Better display of output from failed tests
Now shows failures with diff rather than forcing the user to gaze at
complete actual and expected output looking for deviation.
Notmuch 0.2 (2010-04-16)
========================
+
This is the second release of the notmuch mail system, with actual
detailed release notes this time!
@@ -1416,7 +1462,8 @@ notmuch in subsequent releases.
General features
----------------
-Better guessing of From: header.
+
+* Better guessing of From: header
Notmuch now tries harder to guess which configured address should be
used as the From: line in a "notmuch reply". It will examine the
@@ -1425,12 +1472,12 @@ Better guessing of From: header.
replying to a message sent to a mailing list, and not directly to a
configured address.
-Make "notmuch count" with no arguments count all messages
+* Make "notmuch count" with no arguments count all messages
Previously, it was hard to construct a search term that was
guaranteed to match all messages.
-Provide a new special-case search term of "*" to match all messages.
+* Provide a new special-case search term of "*" to match all messages
This can be used in any command accepting a search term, such as
"notmuch search '*'". Note that you'll want to take care that the
@@ -1439,8 +1486,8 @@ Provide a new special-case search term of "*" to match all messages.
search term and loses its special meaning when combined with any
other search terms.
-Automatically detect thread connections even when a parent message is
-missing.
+* Automatically detect thread connections even when a parent message
+ is missing
Previously, if two or more message were received with a common
parent, but that parent was not received, then these messages would
@@ -1449,22 +1496,23 @@ missing.
General bug fixes
-----------------
-Fix potential data loss in "notmuch new" with SIGINT
+
+* Fix potential data loss in "notmuch new" with SIGINT
One code path in "notmuch new" was not properly handling
SIGINT. Previously, this could lead to messages being removed from
the database (and their tags being lost) if the user pressed
Control-C while "notmuch new" was working.
-Fix segfault when a message includes a MIME part that is empty.
+* Fix segfault when a message includes a MIME part that is empty
-Fix handling of non-ASCII characters with --format=json
+* Fix handling of non-ASCII characters with --format=json
Previously, characters outside the range of 7-bit ASCII were
silently dropped from the JSON output. This led to corrupted display
of utf-8 content in the upcoming notmuch web-based frontends.
-Fix headers to be properly decoded in "notmuch reply"
+* Fix headers to be properly decoded in "notmuch reply"
Previously, the user might see:
@@ -1481,7 +1529,8 @@ Fix headers to be properly decoded in "notmuch reply"
Emacs client features
---------------------
-Show the last few lines of citations as well as the first few lines.
+
+* Show the last few lines of citations as well as the first few lines
It's often the case that the last sentence of a citation is what is
being replied to directly, so the last few lines are often much more
@@ -1489,21 +1538,21 @@ Show the last few lines of citations as well as the first few lines.
citation can be configured, (notmuch-show-citation-lines-prefix and
notmuch-show-citation-lines-suffix).
-The '+' and '-' commands in the search view can now add and remove
-tags by region.
+* The '+' and '-' commands in the search view can now add and remove
+ tags by region
Selective bulk tagging is now possible by selecting a region of
threads and then using either the '+' or '-' keybindings. Bulk
tagging is still available for all threads matching the current
search with the '*' binding.
-More meaningful buffer names for thread-view buffers.
+* More meaningful buffer names for thread-view buffers
Notmuch now uses the Subject of the thread as the buffer
name. Previously it was using the thread ID, which is a meaningless
number to the user.
-Provide for customized colors of threads in search view based on tags.
+* Provide for customized colors of threads in search view based on tags
See the documentation of notmuch-search-line-faces, (or us "M-x
customize" and browse to the "notmuch" group within "Applications"
@@ -1511,9 +1560,10 @@ Provide for customized colors of threads in search view based on tags.
Build-system features
---------------------
-Add support to properly build libnotmuch on Darwin systems (OS X).
-Add support to configure for many standard options.
+* Add support to properly build libnotmuch on Darwin systems (OS X)
+
+* Add support to configure for many standard options
We include actual support for:
@@ -1524,20 +1574,21 @@ Add support to configure for many standard options.
--build --infodir --libexecdir --localstatedir
--disable-maintainer-mode --disable-dependency-tracking
-Install emacs client in "make install" rather than requiring a
-separate "make install-emacs".
+* Install emacs client in "make install" rather than requiring a
+ separate "make install-emacs"
-Automatically compute versions numbers between releases.
+* Automatically compute versions numbers between releases
This support uses the git-describe notation, so a version such as
0.1-144-g43cbbfc indicates a version that is 144 commits since the
0.1 release and is available as git commit "43cbbfc".
-Add a new "make test" target to run the test suite and actually verify
-its results.
+* Add a new "make test" target to run the test suite and actually
+ verify its results
Notmuch 0.1 (2010-04-05)
========================
+
This is the first release of the notmuch mail system.
It includes the libnotmuch library, the notmuch command-line
--
1.7.6.5
More information about the notmuch
mailing list